January 2025

Genie v25.1

New Module Versions
Modules	Version
`genie`	v25.1
`genie.libs.health`	v25.1
`genie.libs.clean`	v25.1
`genie.libs.conf`	v25.1
`genie.libs.filetransferutils`	v25.1
`genie.libs.ops`	v25.1
`genie.libs.parser`	v25.1
`genie.libs.robot`	v25.1
`genie.libs.sdk`	v25.1
`genie.telemetry`	v25.1
`genie.trafficgen`	v25.1

Changelogs

genie

Fix

genie
- Modified
  
  Pinned minimum netaddr package version to 0.10.1.
- Modified
  
  Unpinned netaddr package version in setup.py and Makefile
- Removed TriggerUnconfigureConfigureOspf trigger from yaml file
- Re-enable the syntax warning in Makefile

genie.libs.clean

Fix

iosxe
- Modified ChangeBootVariable
  
  Removed duplicate code from verify_boot_variable step
clean-pkg
- iosxe
  
  set the step as passx if ignore stratup config fail.
- Fix syntax warning

New

clean-pkg
- iosxe
  
  Remove the unused key reload_timeout from install_smu
- iosxe
  
  Added hot smu support for install_remove_smu and install_smu stage
- iosxe
  
  Added multiple smu support for install_remove_smu and install_smu stage
iosxe
- Added
  
  ChangeBootVariable for IE3K

genie.libs.conf

Fix

nxos
- Fix feature service-acceleration
  
  change config line conn-token to connection-token and update unit tests
conf-pkg
- Added new clis in interface and macsec files.
- Fix syntax warning

New

nxos
- Added support for feature service-acceleration
  
  covers all possible configurations currently supported for feature service-acceleration

genie.libs.filetransferutils

Fix

fileserver
- Modified _get_ip
  
  For newer version of netaddr, passing INET_ATON argument IPAddress to allow all kinds of weird-looking addresses to be parsed
filetransferutils-pkg
- Fix syntax warning

genie.libs.health

Fix

health-pkg
- Fix syntax warning

genie.libs.ops

Fix

ops-pkg
- Fix syntax warning

genie.libs.robot

Fix

robot-pkg
- Fix syntax warning

genie.libs.sdk

New

iosxe
- Added configure_nat64_mapt_domain
  
  API to configure nat64 mapt domain
- Added unconfigure_nat64_mapt_domain
  
  API to unconfigure nat64 mapt domain
- Added configure_nat64_route
  
  API to configure nat64 route
- Added configure_nat64_mapt_ce
  
  API to configure nat64 mapt ce
- Added configure_nat_service_all_algs
  
  API to configure nat service all algs
- Added configure_nat_setting_gatekeeper_size
  
  API to configure nat setting gatekeeper size
- Added API request_platform_software_trace_archive
  
  Added API to request_platform_software_trace_archive
- Added configure_eem_applet_watchdog_time
- Added configure_eem_action_cli_command
- Added configure_eem_action_syslog_msg
- Added configure_eem_action_wait
- Added configure_eem_action_info_type_routername
- Added configure_bgp_route_reflector_client
- Added configure_fall_over_bfd_on_bgp_neighbor
- Added unconfigure_interface_evpn_ethernet_segment
- Added configure_l2vpn_evpn_ethernet_segment_all_active
- Added api for clear_platform_software_fed_switch_active_access_security_table_counters
  
  Added new api clear platform software fed switch active access-security table counters.
- Added api for clear_platform_software_fed_switch_active_access_security_auth_acl_counters
  
  Added new api clear platform software fed switch active access-security auth-acl counters .
- Added configure_macro_auto_execute
  
  API to configure macro auto template
- Added unconfigure_macro_auto_execute
  
  API to unconfigure macro auto template
- Added configure_shell_trigger
  
  API to configure shell trigger
- Added unconfigure_shell_trigger
  
  API to unconfigure shell trigger
- Added configure_macro_auto_trigger
  
  API to configure macro auto trigger
- Added unconfigure_macro_auto_trigger
  
  API to unconfigure macro auto trigger
- Added configure_macro_auto_fallback
  
  API to configure macro auto global processing {fallback} {parameters}
- Added unconfigure_macro_auto_fallback
  
  API to unconfigure macro auto global processing {fallback} {parameters}
- Added Async specific APIs for line
  
  configure_line for applying configurations on line.
  
  configure_line_raw_socket_tcp_client for raw socket client on line.
  
  configure_line_raw_socket_tcp_server for raw socket server on line.
  
  unconfigure_line for removing raw line configurations.
  
  unconfigure_line_raw_socket_tcp_client for removing raw socket client on line.
  
  unconfigure_line_raw_socket_tcp_server for removing raw socket server on line.
- Added configure_radius_group_load_balance_method
- Added configure_aaa_authorization_exec
- Added unconfigure_aaa_authorization_exec
- Added configure_aaa_authorization_console
- Added unconfigure_aaa_authorization_console
- Added configure_aaa_accounting_exec_default_start_stop
- Added unconfigure_aaa_accounting_exec_default_start_stop
- Added enable_ssh_on_vty
- Added disable_ssh_on_vty
- Added configure_login_authentication_on_vty
- Added configure_authorization_exec_on_vty
- Added unconfigure_login_authentication_on_vty
- Added unconfigure_authorization_exec_on_vty
- Added configure_aaa_authentication_enable_none
- Added configure_ipv6_flow_monitor_sampler
  
  added api to configure ipv6 flow monitor <monitor_name> sampler <sampler_name> input
- Added configure_macro_auto_device_parameters
  
  API to configure macro auto device {device_name} {parameters}
- Added unconfigure_macro_auto_device_parameters
  
  API to unconfigure macro auto device {device_name} {parameters}
- Added configure_dhcp_option
  
  API to configure ip dhcp pool with option
- Added configure_ip_ddns_update_method
  
  API to configure_ip_ddns_update_method
- Added unconfigure_ip_ddns_update_method
  
  API to unconfigure_ip_ddns_update_method
- Added new API to configure rep ztp on the interface
  
  rep ztp-enable
- Added new API to unconfigure rep ztp on the interface
  
  no rep ztp-enable
- Added API’s to configure cli commands for acl.
  
  API to configure_protocol_acl_any_any
  
  API to unconfigure_protocol_acl_any_any
- Added locate_switch
  
  API to locate switch
- Added configure_interface_macro_description
  
  API to configure macro description on interface
- Added unconfigure_interface_macro_description
  
  API to unconfigure macro description on interface
- Added configure_macro_auto_mac_address_group
  
  API to configure macro auto mac address group
- Added unconfigure_macro_auto_mac_address_group
  
  API to unconfigure macro auto mac address group
- Added API set_platform_software_ilpower_mcu
  
  Added API to set_platform_software_ilpower_mcu
- Added config_pseudowire_class_interworking
- cat9k
  
  c9300
  
  Added API’s to configure and unconfigure the ignore startup config
  
  c9400
  
  Added API’s to configure and unconfigure the ignore startup config
  
  c9800
  
  Added API’s to configure and unconfigure the ignore startup config
  
  c9500
  
  Added API’s to configure and unconfigure the ignore startup config
  
  c9500
  
  C9500-40X
  
  Added API’s to configure and unconfigure the ignore startup config
- Added configure_mac_acl_etherType
- Added configure_routing_ip_route_track
- Added unconfigure_routing_ip_route_track
- Added unconfigure_interface_speed_auto
  
  API to unconfigure interface speed auto on interface
- Added configure_ip_dhcp_relay_information_option_insert
  
  API to configure_ip_dhcp_relay_information_option_insert
- Added unconfigure_ip_dhcp_relay_information_option_insert
  
  API to unconfigure_ip_dhcp_relay_information_option_insert
- Added API show_platform_software_mcu_snapshot_detail_request
  
  Added API to show_platform_software_mcu_snapshot_detail_request
- Added Async specific apis for serial interface
  
  API configure_interface_serial_physical_layer for configuring physical layer.
  
  API unconfigure_interface_serial_physical_layer for unconfiguring physical layer.
  
  API configure_interface_serial_encapsulation for configuring encapsulation.
  
  API unconfigure_interface_serial_encapsulation for unconfiguring encapsulation.
  
  API configure_interface_raw_socket_client for raw socket configuration.
  
  API unconfigure_interface_raw_socket_client for raw socket unconfiguration.
- Added
  
  API for ip host <hostname> <ip_addr> (configure and unconfigure)
  
  API for ip dns server (configure and unconfigure)

Fix

iosxe
- Modified configure_macro_auto_trigger
  
  Modified api to configure trigger based on parameter passed
- Modified configure_policy_map priority percent
- Modified
  
  Updated configure_monitor_capture API with additional arguments
- Removed default argument trunk as True
- Removed the configure_interface_rep_segment_edge_primary api from interface/configure.py and modified configure_rep_segment, configure_fast_rep_segment
- Removed the unconfigure_interface_rep_segment_edge_primary api from interface/configure.py and modified unconfigure_rep_segment, unconfigure_fast_rep_segment
- Modified configure_tacacs_server
  
  Modified the api to configure tacacs server and use hostname instead of ip address as host
- Updated configure_replace API, add hostname learning to detect hostname changes
- Modified configure_interface_speed_auto
- health/cpu
  
  add handeling for InvalidCommandError
genielibs
- Removed TriggerUnconfigureConfigureOspf trigger from yaml file
junos
- Modified verify_ospf_interface_in_database
  
  For newer version of netaddr, passing INET_ATON argument IPAddress to allow all kinds of weird-looking addresses to be parsed
utils
- Modified netmask_to_bits
  
  For newer version of netaddr, passing INET_ATON argument IPAddress to allow all kinds of weird-looking addresses to be parsed
- copy to device
  
  Fixed the logic for proxy dev to check for proxy in servers
- copy_to_device
  
  add support for dual rp devices for http copy using proxy
- copy to device
  
  fix the logic for proxy dev to check for proxy in servers
- copy to device
  
  update the unittest for copy to device using proxy
sdk/blitz
- Change pyATS Health check logging to debug level
health
- Change pyATS Health check logging to debug level
sdk
- Made code 3.13 compliant
sdk-pkg
- Fix syntax warning

Add

sdk-pkg
- Add support for stack device password recovery

genie.libs.parser

Fix

iosxe
- Fixed parser ShowLoggingOnboardSwitchActiveUptimeDetail
  
  Added p12, and p13 to match the uptime and uptime detail
- Modified ShowPolicyMapInterface
  
  Modified ShowPolicyMapTypeSuperParser p1 regex to match port channel subinterfaces.
- Modified ShowControllerEthernetControllerLinkstatus
  
  added optional reason key in schema and corresponding regexp for the same.
  
  Deleted the duplicate copy of ShowControllerEthernetControllerLinkstatus.
- Modified ShowL2tpTunnel
  
  Fixed incorrect regex for parsing.
- Modified ShowProcessesCpuPlatformSorted
  
  Made <sort> key as optional in the schema to accommodate various outputs.
- Modified ShowMacroAutoDevice
  
  added optional device_name argument to return device specific output.
- Modified ShowMacroAutoInterface
  
  added optional interface argument to return interface specific output.
- Added ShowDeviceTrackingDatabaseDetails parser
  
  Modified parser for cli show device-tracking database interface {interface_name} details
  
  Modified parser for cli show device-tracking database vlan {vlan_id} details
- Modified ShowLicenseTechSupport
  
  Modified regex (p0_3) to match the correct key when muliple colons are present (key should not contain colon)
- Modified ShowPlatformSoftwareFedActiveAclInfoDbDetail parser.
  
  Enhanced parser for cli ‘show platform software fed {switch} {mode} acl info db detail’.
  
  Enhanced parser for cli ‘show platform software fed {mode} acl info db detail’.
  
  Enhanced parser for cli ‘show platform software fed switch {mode} acl info db feature {feature_name} detail’.
  
  Enhanced parser for cli show platform software fed switch {switch_var} acl info db feature {feature_name} dir {in_out} cgid {cg_id} detail.
- Modified ShowTelemetryInternalProtocolManager
  
  Fix regex so that it accepts -1 for sockfd field
- Added ShowIpNbarDiscovery
  
  Added <Vlan> interface to support new output
- Modified ShowAAServersSchema
  
  Changed <requests_per_minute_past_24_hours> from schema to Optional.
- Modified HardwareModuleBeaconSlotStatus
  
  Modified p1 regex to match the correct output
  
  Added “hw-module beacon RP {supervisor} status”
- Fix ShowPlatformTcamUtilization.
  
  Added “asic” optional variable to all tcam show commands under 9350, 9500, 9606 and 9600 platforms.
- Fixed parser ShowSwitchStackPortSummary
  
  Fixed regex pattern p1 to match “no cable”
- Fixed parser ShowPppAll
  
  Fixed regex pattern p1 ‘peername’ to match “Charon-037-4P”
- Fixed parser ShowIssuRollbackTimer
  
  Added schema, regex p0 to match the slot
- Modified ShowVersion
  
  Made change for <p3> regex
- Modified ShowSystemIntegrityAllMeasurementNonce
  
  Made <PCR0> key as optional to pick the latest output
- Modified ShowLispPublicationPrefixSuperParser
  
  Changed metric in schema from int to str.
  
  Fixed incorrect regex for parsing metric.
- Modified ShowBgpAllDetail
- Modified ShowIpBgpL2VPNEVPN
- Modified ShowPlatformHardwareFedSwitchQosQueueConfigInterfaceQueueInclude
  
  modified the op as blocked changed to byte in output.
- Modified fix for ShowPlatformSoftwareFedSwitchActiveIpRoute
  
  Added sgt keys in schema for show platform software fed switch {mode} ip route .
  
  Added cli show platform software fed switch {mode} ip route vrf {vrf_name}.
genieparer
- Modified
  
  Unpinned netaddr package version in Makefile
  
  Updated parsers to pass INET_ATON argument to IPAddress to allow all kinds of weird-looking addresses to be parsed
iosxr
- Modified ShowRouting
  
  Added support for new optional variables via_class,weight,via_interface,via_flags.
  
  Modified regex pattern to support above variables.
nxos
- Modified ShowForwardingDistributionMulticastRoute
  
  Updated <gaddr> key as option in schema to match new output.
- Fixed parser ShowIpv6InterfaceVrfAll
  
  Fixed regex Pattern to match and additional attribut RFC compliant in urser’s output
- Modified ShowBfdNeighbor
  
  Changed <p8> regex to match new output.
- Modified ShowInterfaceCounters
  
  Added Optional <in_pkts>, <out_pkts> in schema.
  
  Updated regex pattern <p1> to accommodate new nxos output for S1 G200 sub interface stats.
nsos
- Enhanced parser ShowModule
  
  Enhanced the parser for the cli ‘show module’ to parse new SAM (Service Accelerator Module)
- Modified parser ShowInventory
  
  Enhanced the parser for the cli ‘show inventory’ to parse new SAM (Service Accelerator Module)
genie.libs.parser
- Fix syntax warnings across all os
added optional multipath arguement to return multipath for specific output.
added optional multipath arguement to return multipath for specific output.

New

iosxe
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIpv4SgtMapping parser.
  
  Added parser for CLI show platform hardware fed switch {switch_var} fwd-asic insight ipv4_sgt_mapping({devid}).
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIpv6SgtMapping parser.
  
  Added parser for CLI show platform hardware fed switch {switch_var} fwd-asic insight ipv6_sgt_mapping({devid}).
- Added ShowPlatformNatTranslationsStandby parser.
  
  Added parser for CLI ‘show platform nat translations standby’.
- Added ShowPlatformNatTranslationsStandbyStatistics parser.
  
  Added parser for CLI ‘show platform nat translations standby statistics’.
- Added ShowPlatformHardwareFedSwitchQosQueueConfig
  
  Added parser “show platform hardware fed active qos queue config interface {interface}” under c9350, c9610, c9500
- Added schema and parser for
  
  ‘show authentication sessions session-id {session_id} policy’,
  
  ‘show authentication sessions session-id {session_id} switch active R0’,
  
  ‘show authentication sessions session-id {session_id} details’
- Added ShowPreemptionSummary.
  
  Added parser for CLI ‘show preemption summary’.
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightL2MirrorCommandErspan parser.
  
  Added parser for cli show platform hardware fed switch active fwd-asic insight l2_mirror_command_erspan({mirror_gid}).
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightL2MirrorCommandStatus parser.
  
  Added parser for cli show platform hardware fed switch active fwd-asic insight l2_mirror_command_status.
- Added ShowIpPimVrfMdtSendSchema parser
  
  Added schema and parser for cli ‘show ip pim vrf {vrf_name} mdt send’
- Added ShowControllersPowerInline
  
  Added schema and parser for show controllers power inline
- Added ShowIpDhcpPool Parser in show_ip.py
  
  show ip dhcp pool
- Added ShowHardwareLedState schema and parser
  
  Added schema and parser for show hardware led state
- Added ShowPlatformSoftwareCpmSwitchActiveB0PacketsControlIpc
  
  Added parser ShowPlatformSoftwareCpmSwitchActiveB0PacketsControlIpc
- Added schema and parser for cli
  
  ‘show access-session session-id {session_id} details’,
  
  ‘show access-session session-id {session_id} policy’,
  
  ‘show access-session session-id {session_id} switch {mode} {rp_slot}’’
- Added ShowPlatformSoftwareFedSwitchActiveEtherchannelLoadbalanceProtocolsSchema
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-fl-nh-port-v6 {sourcemac} {destinationmac}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-fl-nh-v6 {sourcemac} {destinationmac} {flow_label} {next_header}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-protocol-port-v4 {source} {destinatio} {protocol} {sour_port} {dest_port}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-protocol-v4 {source} {destination} {protocol}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-addr {sourcemac} {destinationmac}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-fl-nh-port-v6 {sourcemac} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header} {sour_port} {dest_port}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-fl-nh-v6 {sourcemac} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header}’
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-protocol-v4 {sourcemac} {sourceip} {destinationip} {protocol}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-protocol-port-v4 {sourcemac} {sourceip} {destinationip} {protocol} {sour_port} {dest_port}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-fl-nh-port-v6 {sourcemac} {vlan_id} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header} {sour_port} {dest_port}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-fl-nh-v6 {sourcemac} {vlan_id} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-protocol-port-v4 {sourcemac} {vlan_id} {sourceip} {destinationip} {protocol} {sour_port} {dest_port}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-protocol-v4 {sourcemac} {vlan_id} {sourceip} {destinationip} {protocol}’,
- Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlanid {sourcemac} {vlan_id}’.
- Added ShowPlatsoftwaremcusnapshot parser
  
  Added schema and parser for cli show platform software mcu switch {switch_num} {route-processor} snapshot_detail display
- Added ShowPlatformSoftwareFedSwitchActiveAclBindSdkDetail parser.
  
  Added parser for CLI ‘show platform software fed switch {switch_var} acl {acl} sdk detail’.
  
  Added parser for CLI ‘show platform software fed switch {switch_var} acl {acl} sdk feature {feature_name} dir in cgid {cg_id} detail’.
  
  Added parser for CLI ‘show platform software fed switch {switch_var} acl {acl} sdk feature {feature_name} dir in detail asic {asic_no}’.
  
  Added parser for CLI ‘show platform software fed switch {switch_var} acl {acl} sdk feature {feature_name} detail’.
  
  Added parser for CLI ‘show platform software fed switch {switch_var} acl {acl} sdk if-id {if_id} detail’.
- Added ShowPlatformSoftwareFedSwitchActiveAclBindSdkfeatureCgaclDetail parser.
  
  Added parser for CLI ‘show platform software fed switch active acl bind sdk feature cgacl detail’.
- Added support for parsing the ‘show authentication sessions mac 001a.a136.c68a details’,
- Added ShowFlowMonitorS1InputCacheFilter
  
  Added schema and parser for ‘show flow monitor {name} cache filter {ip_version} source address {src_addr} {ip_version} destination address {dst_addr} format table’
- Added parser for ShowMacroAutoAddressgroup
  
  Added parser for cli “show macro auto address-group {address_group_name}”
- Added ShowSampler.
  
  Added parser for CLI ‘show sampler <sampler>’.
- Added ShowPlatformSoftwareFedSwitchSecurityFedSisfIfId parser.
  
  Added parser for cli show platform software fed switch {switch} security-fed sisf if-id {if_id}.
- Added ShowPlatformSoftwareFedSwitchSecurityFedSisfVlan parser.
  
  Added parser for cli show platform software fed switch {switch} security-fed sisf vlan {vlan}.
- Added ShowPlatformHardwareFedNpuDscDump parser
  
  Added schema and parser for cli show platform hardware fed switch {mode} npu slot 1 port {port_num} dsc_dump
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightS1SgtMappingStatusV4 parser.
  
  Added parser for CLI ‘show platform hardware fed switch {switch} fwd-asic insight s1_sgt_mapping_status_v4({devid})’.
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightS1SgtMappingStatusV6 parser.
  
  Added parser for CLI ‘show platform hardware fed switch {switch} fwd-asic insight s1_sgt_mapping_status_v6({devid})’.
- Added ShowPlatformSoftwareFedSwitchActivePuntPacketCaptureBriefCount parser.
  
  Added parser for cli ‘show platform software fed {switch} {switch_number} punt packet-capture brief | count {key}’.
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightSdkObjects parser.
  
  Added parser for cli show platform hardware fed switch active fwd-asic insight sdk_objects{(‘otype’)}.
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightSdkObject parser.
  
  Added parser for cli show platform hardware fed switch active fwd-asic insight sdk_object{(‘otype’)}.
- Added ShowL2vpnEvpnMultihomingVlan
  
  show l2vpn evpn multihoming vlan
- Added class ShowPlatformSoftwareFedSwitchActiveSgaclDetail
  
  show platform software fed switch {switch_type} sgacl detail .
- Added class ShowPlatformSoftwareFedSwitchActiveSgaclPort
  
  show platform software fed switch {switch_type} sgacl port.
- Added ShowPlatformSoftwareFedSwitchActiveSecurityDhcpStatistics
  
  show platform software fed switch {switch_type} security dhcp statistics
- Added ShowPlatformSoftwareFedSwitchSecurityFedDhcpVlandetail
  
  show platform software fed switch {switch_type} security-fed dhcp vlan {vlan_num} detail
- Added ShowPlatformHardwareFedeyescan parser
  
  Added parser for cli show platform Hardware Fed Eyescan
- Added ShowPlatoformSoftwareFedSwitchActiveInsightNplTable parser
  
  Added parser for cli sh platform hard fed switch {switch_type} fwd-asic insight npl_table{table_name}
- Added ShowPlatformSoftwareFedSwitchActiveAclSgaclResourceUsageSchema parser
  
  Added parser for cli show platform software fed switch {switch_type} acl sgacl resource usage
- Added ShowPlatformSoftwareFedSwitchActiveIfmMappingsGpn.
  
  Added parser for CLI ‘show platform software fed switch active ifm mappings gpn’.
  
  Added an example of a string that would match to the regular expression.
  
  Added required comments in the file.
  
  Added parser for CLI ‘show platform software fed switch active ifm mappings gpn’.
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicResourceTcamTableSghash parser.
  
  Added parser for cli ‘show platform hardware fed switch {switch_var} fwd-asic resource tcam table sghash all’.
  
  Added parser for cli ‘show platform hardware fed switch {switch_var} fwd-asic resource tcam table sghash asic_no {asic_no}’.
  
  Added parser for cli ‘show platform hardware fed switch {switch_var} fwd-asic insight sgmatrix({max_asic})’.
- Added ShowAccessSessionDetails
  
  Added schema and parser for ‘show access-session interface {interface} details switch {switch_num} R0’,
  
  Added schema and parser for ‘show access-session interface {interface} policy’,
  
  Added schema and parser for ‘show access-session interface {interface} policy switch {mode} R0’,
  
  Added schema and parser for ‘show access-session database interface {interface} details’,
  
  Added schema and parser for ‘show access-session database interface {interface} policy’,
  
  Added schema and parser for ‘show access-session database interface {interface} policy switch {mode} R0’,
  
  Added schema and parser for ‘show access-session database interface {interface} switch {switch_num} R0’
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightS1SecGroupsMatrixMapStatus parser.
  
  Added parser for cli “show platform hardware fed switch {switch} fwd-asic insight s1_sec_groups_matrix_map_status({devid})”.
- Added ShowIpDhcpSnooping parser.
  
  Added parser for cli ‘show ip dhcp snooping’.
- Added ShowPlatformSoftwareFedSwitchActiveSecurityFedArpStatistics parser.
  
  Added parser for cli show platform software fed switch active security-fed arp statistics.
- Added ShowPlatformSoftwareFedSwitchActiveAccessSecurityTableUsage parser.
  
  Added parser for cli show platform software fed switch active access-security table usage.
- Added schema and parser for ‘show authentication sessions switch {switch} R0’,
- Added ShowIpVrfMdtReceiveDetail parser
  
  Added schema and parser for cli ‘show ip pim vrf {vrf_name} mdt receive detail’
- Added Parser for ShowPlatSoftFedSwAcAccessSecurityClientTableMac
  
  show platform software fed switch active access-security mac-client-table summary
  
  show platform software fed switch active access-security mac-client-table interface if-id {port_if_id}
- Added ShowIpSourceBinding parser.
  
  Added parser for cli
- Added ShowPlatformSoftwareFedSwitchSecurityFedIpsgIfId parser.
  
  Added parser for cli ‘show platform software fed switch {switch} security-fed ipsg if-id {if_id}’.
- Added ShowIpPimVrfMdtHistoryInterval parser
  
  Added schema and parser for cli ‘show ip pim vrf {vrf_name} mdt history interval {interval}’
- Added support for parsing the ‘show authentication sessions interface {interface} details’,
- Added support for parsing the ‘show authentication sessions interface {interface} policy’,
- Added support for parsing the ‘show authentication sessions interface {interface} details switch {switch} R0’,
- Added support for parsing the ‘show authentication sessions interface {interface} policy switch {switch} R0’,
- Added support for parsing the ‘show authentication sessions database interface {interface} details’,
- Added support for parsing the ‘show authentication sessions database interface {interface} policy’,
- Added support for parsing the ‘show authentication sessions database interface {interface} policy switch {switch} R0’,
- Added parser for ShowPlatformSoftwareFedSwitchActiveIfmInterfacesDetail
  
  Added pattern as a comment for regex
- Added ShowRawSocketTcpSessions
  
  Added schema and parser for show raw-socket tcp sessions
  
  Added schema and parser for show raw-socket tcp statistic
- Added ShowPlatformSoftwareFedSwitchActiveIfmMappings
  
  show platform software fed switch active ifm mappings l2-attachment-circuit
  
  show platform software fed switch active ifm mappings l3-attachment-circuit
  
  show platform software fed switch active ifm mappings system-port
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIpSourceGuardDef parser.
  
  Added parser for cli ‘show platform hardware fed switch {switch} fwd-asic insight ip_source_guard_def’,
  
  Added parser for cli’show platform hardware fed switch {switch} fwd-asic insight ip_source_guard_def()’,
  
  Added parser for cli’show platform hardware fed switch {switch} fwd-asic insight ip_source_guard_def({devid})’.
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIpSourceGuardAcl parser.
  
  Added parser for cli’show platform hardware fed switch {switch} fwd-asic insight ip_source_guard_acl’,
  
  Added parser for cli’show platform hardware fed switch {switch} fwd-asic insight ip_source_guard_acl()’,
  
  Added parser for cli’show platform hardware fed switch {switch} fwd-asic insight ip_source_guard_acl({devid})’.
- Added ShowControllersEthernetControllerPreemptionDrops.
  
  Added parser for CLI ‘show controllers ethernet-controller <intf> preemption drops’.
- Added ShowControllersEthernetControllerPreemptionHandshake.
  
  Added parser for CLI ‘show controllers ethernet-controller <intf> preemption handshake’.
- Added ShowControllersEthernetControllerPreemptionStats.
  
  Added parser for CLI ‘show controllers ethernet-controller <intf>> preemption stats ‘.
- Added ShowPlatformSoftwareFedSwitchActiveAccessSecurityTableSummary parser.
  
  Added parser for cli show platform software fed switch active access-security table summary.
  
  Added parser for cli show platform software fed switch active access-security table mac {mac_id}.
  
  Added parser for cli show platform software fed switch active access-security table interface if-id {if_id}
- Added ShowPlatformSoftwareFedSwitchActiveIpv6Route parser.
  
  Added parser for cli show platform software fed switch {mode} ipv6 route.
- Added parser for cli show platform software fed switch {mode} ipv6 route vrf {vrf_name}.
- Added ShowAuthenticationSessionMethodDetails parser.
  
  Added schema and parser for ‘show access-session mac {mac} interface {interface} details’
  
  Added schema and parser for ‘show access-session mac {mac} method {method} details’
  
  Added schema and parser for ‘show access-session mac {mac} method {method} details switch {mode} {rp_slot}’
  
  Added schema and parser for ‘show access-session mac {mac} policy’
utils
- Add a new api to find duplicates in the AbstractTree passed to function.
- unittest
‘show authentication sessions mac 001a.a136.c68a interface gigabitethernet2/0/3 details’,
‘show authentication sessions mac 001a.a136.c68a method dot1x details’,
‘show authentication sessions mac 001a.a136.c68a method dot1x details switch active r0’,
‘show authentication sessions mac 001a.a136.c68a policy’.
nxos
- added new parser ShowInterfaceCountersErrors
  
  Added new parser for the cli “show interface counters errors”
- added new parser ShowInterfaceSnmpIfIndex
  
  added new parser for the cli “show interface snmp-ifindex”
- Added ShowBfdNeighbor
  
  show bfd neighbor
- Added ShowBfdNeighborDetail
  
  show bfd neighbor detail
- rv1
  
  Added ShowIpIgmpSnooping
  
  Added schema and parser for ‘show ip igmp snooping’
show platform software fed switch active access-security mac-client-table mac {client_mac}

January 2025

Changelogs

genie

Fix

genie.libs.clean

Fix

New

genie.libs.conf

Fix

New

genie.libs.filetransferutils

Fix

genie.libs.health

Fix

genie.libs.ops

Fix

genie.libs.robot

Fix

genie.libs.sdk

New

Fix

Add

genie.libs.parser

Fix

New

genie.telemetry