February 2025
February 25 - Genie v25.2
Modules |
Version |
|---|---|
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
|
v25.2 |
Changelogs
genie
New
- ops
Added revisions to ops
- dq
Added
condition_levelargument toget_values
- json
Added standalone makers for apis, ops, clean, models, triggers, and verifications
- abstraction.token
Fixed bug with
VersionRangeeq
- genie.abstract
- Updated version parser
support more version formats
Fix
- genie harness
- processors
Enhanced message for initialize_traffic
genie.libs.clean
Add
- iosxe
- Modified InstallImage
Updated the logic for the device to reload if it does not do
Fix
- clean-pkg
- iosxe
- Modified CopyToDevice
Added check not to skip copy_to_device when smu image is provided
- iosxe
- Modified InstallImage
In the show version parsed output, we don’t have a ‘mode’ key. Instead, we have an ‘installation_mode’ key, from which we retrieve the ‘installation_mode’ value.
- clean
Add quad support
Reverted the changes to reload with service wrapper
Changed breakout interface behaviour in ConfigureInterfaces stage
genie.libs.conf
Fix
- nxos
- Fix feature service-acceleration
change vrf submode config to single line config and update unit tests
vrf vrf1 module-affinity 1is now in a single line instead ofvrf vrf1n module-affinity 1n exit
- Fix interface conf model
Subinterfaces can now handle
mac_addressattribute for nxos.
- conf
- Device
Updated Device conf learn_interface_mac_addresses to ignore case
- Interface
Added sp7 and sp8 port speeds
- IOSXE
Moved interface configurations
Moved switchport configurations
- IOSXR
Added HundredGigabitEthernetInterface
Added FourHundredGigabitEthernetInterface
- NXOS
Changed parent class of VirtualInterface to Interface
Added _build_config_interface_submode to PortchannelInterface
genie.libs.filetransferutils
genie.libs.health
genie.libs.ops
Fix
- ops
Updated management ops schema
- IOSXE
Added logger to interface
Added include to leaves
Added serial number to platform ops
- Cat9k
Added stack discovery
- NXOS
Modified command used into interface ops
Modified platform ops
- Sonic
Added kwargs to learn
Added kwargs to platform learn
- IOSXR
Added leaves for chassis and chassis_sn
New
- ops
- Generic
Added platform ops revision
- IOSXE
Added management ops
Added platform ops revision
- Cat9k
Added platform ops revision
- C9500-32QC
Added tests
- NXOS
Added management ops
Added platform ops revision
- n5k
Added platform ops revision
- IOSXR
Added platform ops revision
- IOS
Added management ops for IOS
genie.libs.robot
genie.libs.sdk
New
- iosxe
- Added configure_interface_ip_subscriber
API to configure_interface_ip_subscriber
- Added unconfigure_interface_ip_subscriber
API to unconfigure_interface_ip_subscriber
- Added configure_ip_cef
API to configure_ip_cef
- Added unconfigure_ip_cef
API to unconfigure_ip_cef
- Added configure_ip_dhcp_client
API to configure_ip_dhcp_client
- Added unconfigure_ip_dhcp_client
API to unconfigure_ip_dhcp_client
- Added configure_ip_dhcp_server
API to configure_ip_dhcp_server
- Added unconfigure_ip_dhcp_server
API to unconfigure_ip_dhcp_server
- Added configure_tftp_server
API to configure_tftp_server
- Added unconfigure_tftp_server
API to unconfigure_tftp_server
- Added configure_interface_ipv6_rip
API to configure_interface_ipv6_rip
- Added unconfigure_interface_ipv6_rip
API to configure_interface_ipv6_rip
- Added configure_interface_ipv6_dhcp_server_allow_hint
API to configure_interface_ipv6_dhcp_server_allow_hint
- Added unconfigure_interface_ipv6_dhcp_server_allow_hint
API to unconfigure_interface_ipv6_dhcp_server_allow_hint
- Added configure_ipv6_dhcp_server
API to configure_ipv6_dhcp_server
- Added unconfigure_ipv6_dhcp_server
API to configure_ipv6_dhcp_server
- Added configure_ipv6_dhcp_relay_option
API to configure_ipv6_dhcp_relay_option
- Added unconfigure_ipv6_dhcp_relay_option
API to unconfigure_ipv6_dhcp_relay_option
- Added new API to configure ip dhcp ping packets
ip dhcp ping packets {packets_no}
- Added new API to unconfigure ip dhcp ping packets
no ip dhcp ping packets {packets_no}
- Added new API to configure ip dhcp remember
ip dhcp remember
- Added new API to unconfigure ip dhcp remember
no ip dhcp remember
- Added new API to configure ipv6 nd managed-config-flag on the interface
ipv6 nd managed-config-flag
- Added new API to unconfigure ipv6 nd managed-config-flag on the interface
no ipv6 nd managed-config-flag
- Added new API to configure ipv6 dhcp-relay bulk-lease
ipv6 dhcp-relay bulk-lease {option} {value}
ipv6 dhcp-relay bulk-lease {option}
- Added new API to unconfigure ipv6 dhcp-relay bulk-lease
no ipv6 dhcp-relay bulk-lease {option} {value}
no ipv6 dhcp-relay bulk-lease {option}
- Added new API to configure ipv6 dhcp relay destination global
API to configure ipv6 dhcp relay destination global
- Added new API to unconfigure ipv6 dhcp relay destination global
API to unconfigure ipv6 dhcp relay destination global
- Added new API to configure ipv6 dhcp pool functions
API to configure ipv6 dhcp pool functions
- Added new API to unconfigure ipv6 dhcp pool
API to unconfigure ipv6 dhcp pool
- Added unconfigure_ipv6_dhcp_pool_prefix_delegation_pool
added api to unconfigure_ipv6_dhcp_pool_prefix_delegation_pool under ipv6/configure.py
- Added unconfigure_ipv6_local_pool
added api to unconfigure_ipv6_local_pool under ipv6/configure.py
- Added unconfigure_ipv6_dhcp_client_pd_on_interface
added api to unconfigure_ipv6_dhcp_client_pd_on_interface under interface/configure.py
- Added API configure_bfd_ospf_timers
added api to configure bfd timers for ospf
- Added API rp_bfd_all_interfaces
API to enable BFD on all interfaces on the device
- Added configure_route_map_with_description
API to configure route-map with description
- Added route_map_unconfigure_description
API to unconfigure route-map with description
- Added unconfigure_route_map
API to unconfigure route-map
- Added configure_rep
New API to configure rep segment
- Added configure_fastrep
New API to configure fastrep segment
- Added unconfigure_rep
New API to unconfigure rep segment
- Added unconfigure_fastrep
New API to unconfigure fastrep segment
- Added new API to configure ipv6 dhcp binding track ppp
ipv6 dhcp binding track ppp
- Added new API to unconfigure ipv6 dhcp binding track ppp
no ipv6 dhcp binding track ppp
- Added new API to configure ipv6 dhcp route-add
ipv6 dhcp {route_add}
- Added new API to unconfigure ipv6 dhcp route-add
no ipv6 dhcp {route_add}
- Added new API to configure ipv6 dhcp server join all-dhcp-server
ipv6 dhcp server join all-dhcp-server
- Added new API to unconfigure ipv6 dhcp server join all-dhcp-server
no ipv6 dhcp server join all-dhcp-server
- Added new API to configure ip dhcp binding cleanup interval
ip dhcp binding cleanup interval {interval_time}
- Added new API to unconfigure ip dhcp binding cleanup interval
no ip dhcp binding cleanup interval {interval_time}
- Added configure_ipv6_dhcp_relay_source
API to configure ipv6 dhcp-relay trust source-interface {interface}
- Added unconfigure_ipv6_dhcp_relay_source
API to unconfigure ipv6 dhcp-relay trust source-interface {interface}
- Added configure_source_destination_remote_vlan
API for configure source destination remote vlan
- Added unconfigure_source_destination_remote_vlan
API for unconfigure source destination remote vlan
- Added configure_data_mdt
API to configure data mdt
- Added new API to verify ip address on interface
API to verify ip address on interface
- Added configure_interface_ipv6_dhcp_client_request_vendor
API to configure_interface_ipv6_dhcp_client_request_vendor
- Added unconfigure_interface_ipv6_dhcp_client_request_vendor
API to unconfigure_interface_ipv6_dhcp_client_request_vendor
- Added configure_interface_ipv6_dhcp_client_information
API to configure_interface_ipv6_dhcp_client_information
- Added unconfigure_interface_ipv6_dhcp_client_information
API to unconfigure_interface_ipv6_dhcp_client_information
- Added configure_ipv6_dhcp_test_relay
API to configure_ipv6_dhcp_test_relay
- Added unconfigure_ipv6_dhcp_test_relay
API to unconfigure_ipv6_dhcp_test_relay
- Added configure_ipv6_dhcp_test_server
API to configure_ipv6_dhcp_test_server
- Added unconfigure_ipv6_dhcp_test_server
API to unconfigure_ipv6_dhcp_test_server
- Added unconfigure_ipv6_dhcp_client_pd_on_interface
API to unconfigure_ipv6_dhcp_client_pd_on_interface
- Added unconfigure_ip_unnumbered_on_interface
API to unconfigure_ip_unnumbered_on_interface
- Added enable_ospf_bfd_all_interfaces
API to configure enable_ospf_bfd_all_interfaces
Added def configure_device_sensor_dhcpv6_snooping
Added def unconfigure_device_sensor_dhcpv6_snooping
- SPAN
- Added configure_remote_span_on_vlan
API to configure remote span on vlan
- Added API set_isis_timers
API to configure isis timers on the device
- Added configure_device_tracking_policy_reachable
API to configure device tracking options
- Added configure_device_tracking_binding_globally
API to configure device-tracking binding vlan globally
- Added unconfigure_device_tracking_binding_globally
API to unconfigure device-tracking binding vlan globally
- Added configure_ip_dhcp_database
API to configure_ip_dhcp_database
- Added unconfigure_ip_dhcp_database
API to unconfigure_ip_dhcp_database
Added configure_logging_host
Added unconfigure_logging_host
Added configure_logging_source_interface
Added unconfigure_logging_source_interface
- Added API enable_eigrp_bfd_all_interfaces
configure api for Enabling bfd on all interfaces for eigrp instance
- Added API configure_ospf_interface_cost
API to configure ospf interface cost on the device
Added API configure_radius_server_dtls_trustpoint
API to Configure radius server dtls trustpoint
- Added configure_ipv6_pim_rp_vrf
configure api for ipv6 pim rp vrf
Added ip pim send-rp-announce Loopback0 scope 10
- Added configure_interface_ip_ddns_update
API to configure_interface_ip_ddns_update
- Added unconfigure_interface_ip_ddns_update
API to unconfigure_interface_ip_ddns_update
- Added configure_interface_ip_dhcp_client
API to configure_interface_ip_dhcp_client
- Added unconfigure_interface_ip_dhcp_client
API to unconfigure_interface_ip_dhcp_client
- Added API set_platform_software_selinux
Added API to set_platform_software_selinux
- Added new API to configure access-session tls-version
access-session tls-version {tls-version}
- Added new API to unconfigure access-session tls-version
no access-session tls-version
- Updated configure_eap_profile
updated api to configure_eap_profile for ciphersuite
Added configure_tracking_object
Added unconfigure_tracking_object
- Added configure_preemption_easycli
New API to configure preemption easycli
- Added unconfigure_preemption_easycli
New API to unconfigure preemption easycli
- sdk-pkg
clear_raw_socket_transport_statistics_all
- Added new API to configure ip dhcp relay on the interface
API to configure ip dhcp relay on the interface
- Added new API to unconfigure ip dhcp relay on the interface
API to unconfigure ip dhcp relay on the interface
- Added new API to configure ipv6 dhcp ping packets
API to configure ipv6 dhcp ping packets
- Added new API to configure ip dhcp drop inform
API to configure ip dhcp drop inform
- Added new API to unconfigure ip dhcp drop inform
API to unconfigure ip dhcp drop inform
- Added
configure_scada_dnp3_serial_channel
configure_scada_dnp3_serial_session
configure_scada_dnp3_ip_channel
configure_scada_dnp3_ip_session
configure_scada_enable
unconfigure_scada_enable
unconfigure_scada_dnp3_ip_session
unconfigure_scada_dnp3_ip_channel
unconfigure_scada_dnp3_serial_session
unconfigure_scada_dnp3_serial_channel
configure_scada_t101_serial_channel
configure_scada_t101_serial_session
configure_scada_t101_serial_sector
configure_scada_t104_ip_channel
configure_scada_t104_ip_session
configure_scada_t104_ip_sector
unconfigure_scada_t104_ip_sector
unconfigure_scada_t104_ip_session
unconfigure_scada_t104_ip_channel
unconfigure_scada_t101_serial_sector
unconfigure_scada_t101_serial_session
unconfigure_scada_t101_serial_channel
- Added unconfig_svi_vlan_range
API to unconfig_svi_vlan_range
- sdk
- ios
Added new API to clear_idle_vty_sessions
- iosxe
Added new API to clear_idle_vty_sessions
Added execute_issu_set_rollback_timer API
Added API for execute_issu_set_rollback_timer
Updated regex for is_management_interface
- utils
Added abstract argument to parser call
Added time_to_int
Added PID_BREAKOUT_MAP
- IOSXR
Added breakout_interface_names API
- sdk-pkg
- ixos
Added api to get bandwidth
Fix
- iosxe
- Modified
Updated configure_interface_monitor_session API with additional optional argument to specify the monitor session direction.
- Updated api configure_ip_on_tunnel_interface
updated api with ip_mode to support both ip and ipv4
- Modified configure dhcp pool API to support all the dhcp pool parameters
API to configure dhcp pool
- Added configure_ipv6_dhcp_relay_destination_ipv6address
API to configure_ipv6_dhcp_relay_destination_ipv6address
- Added uncconfigure_ipv6_dhcp_relay_destination_ipv6address
API to unconfigure_ipv6_dhcp_relay_destination_ipv6address
- cat9k
- c9500
Updated API’s to configure and unconfigure the ignore startup config
- c9500
- C9500-48Y4C
Added API’s to configure and unconfigure the ignore startup config
- Updated configure_interface_switchport_access_vlan
updated api to configure_interface_switchport_access_vlan
- Updated configure_dialer_interface
updated api to configure_dialer_interface
- Updated configure_ppp_multilink
updated api to configure_ppp_multilink
- Updated clear_platform_software_fed_switch_active_access_security_table_counters
updated api to clear_platform_software_fed_switch_active_access_security_table_counters
- Updated clear_platform_software_fed_switch_active_access_security_auth_acl_counters
updated api to clear_platform_software_fed_switch_active_access_security_auth_acl_counters
Modified configure_subinterface to include vrf
Modified config_interface_carrier_delay made delay_type an optional argument
- Modified
Updated configure_replace API to raise SubCommandFailure exception if error pattern matched
- sdk
- Generic
Added
disconnect_termserverargument toexecute_clear_line
- sdk-pkg
- iosxe
updated the clear_idle_vty_sessions api
- utils
updated the time_to_int function
- tooling
- Modified Makefile
Updated makefile to include make jsons for each feature
- abstracted_libs
- processors
Enhanced message for initialize_traffic
genie.libs.parser
New
- iosxe
- Added ShowPlatformSoftwareFedSwitchActiveIpMfibVrf parser
- Added schema and parser for cli
‘show platform software fed switch active ip mfib vrf {vrf_name} {group} {source}’
‘show platform software fed switch active ip mfib {group} {source}’
‘show platform software fed active ip mfib vrf {vrf_name} {group} {source}’
‘show platform software fed active ip mfib {group} {source}’
- Added ShowPlatformSoftwareFedPuntAsicCauseBrief
show platform software fed switch {mode} punt asic-cause brief
- Added ShowAutoInstTrace parser
Added schema and parser for cli ‘show auto inst trace’
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIfmPortAn37Status parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight ifm_port_an37_status({system_port_gid}).
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIfmPortAnltStatus parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight ifm_port_anlt_status({system_port_gid}).
- Added
show raw-socket tcp sessions local
- Added ShowPlatformSoftwareRouteMap parser
Added schema and parser for cli “show platform software route-map R0 map”
- Added ShowPlatformHardwareAuthenticationStatus
Added parser “show platform hardware authentication status” under c9610
Added support for parsing the ‘show access method dot1x details’
- Added ShowHardwareLed schema and parser
Added schema and parser for show hardware led
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightIfmPortStatus parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight ifm_port_status({system_port_gid}).
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightPortSerdesStatus parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight ifm_port_serdes_status({system_port_gid}).
- Added ShowRunningConfigAAARadiusServer
Added schema and parser for ‘Show Running Config AAA Radius Server’
Added support for parsing the ‘show cts policy sgt {sgt}’
- Added parser ShowPlatformSoftwareFedSwitchActivePortIfId
Added parser for ‘show platform software fed {switch} {mode} port if_id {if_id}’
- Added ShowInterfacesCountersPort parser
Added schema and parser for cli ‘show interfaces counters port’
- Added ShowIPDhcpImport Parser in show_ip.py
show ip dhcp import
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightL2AttachmentCircuitStatus and ShowPlatformHardwareFedSwitch1FwdAsicInsightIfmLagMembers parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight l2_attachment_circuit_status().
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight ifm_lag_members({lag_gid}).
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightL2mRoutes parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight l2m_routes({switch_gid}).
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightL2mGroups parser.
Added parser for cli sshow platform hardware fed switch {switch_id} fwd-asic insight l2m_groups({l2_mcg_gid}).
- Added ShowIpv6GeneralPrefix Parser in show_ipv6.py
show ipv6 general-prefix
Added schema and parser for ‘show spanning-tree mst interface {interface}’
Added schema and parser for ‘show switch stack-ports summary’
- Added ShowAuthenticationSessionMethodDetails parser.
‘show authentication sessions method {method} details’
‘show authentication sessions method {method} interface GigabitEthernet2/0/3 details’
‘show authentication sessions method {method} policy’
Added support for parsing the ‘show platform software fed {switch} {active} ip mfib vrf {vrf_name} {group} {source}’,
- Added ShowPlatformSoftwareFedActiveIfmInterfaceNameTunnel5 parser
Added schema and parser for cli ‘show platform software fed active ifm interface_name tunnel5’
- Added ShowPlatformSoftwareFedSwitchActiveIpMulticastInterface parser
Added parser for cli show platform software fed switch {module} ip multicast interface {if_id}
Added parser for cli show platform software fed switch {module} ipv6 multicast interface {if_id}
- Added ShowPlatformSoftwareFedSwitchActiveOifsetL3mHash parser
Added parser for cli show platform software fed switch active oifset l3m hash {hash} detail
- Added ShowPlatformSoftwareFedSwitchFnfMonitorRulesAsic0 parser
Added schema and parser for cli “show platform software fed switch {switch_num} fnf monitor rules asic 0”
- Added support for parsing the following commands
‘show authentication sessions interface GigabitEthernet2/0/3’
‘show authentication sessions interface GigabitEthernet2/0/3 switch standby R0’
‘show authentication sessions interface GigabitEthernet2/0/3 switch active R0’
‘show authentication sessions database interface GigabitEthernet2/0/3 switch active R0’
‘show authentication sessions database interface GigabitEthernet2/0/3 switch standby R0’
‘show authentication sessions database interface GigabitEthernet2/0/3 switch 1 R0’
- Added ShowMonitorCaptureFileDetailed
Added schema and parser for’show monitor capture file flashfile1.pcap packet-number 7 detailed’
- Added ShowIPDhcpConflict Parser in show_ip.py
show ip dhcp conflict
- Added ShowIpPolicy Parser in show_ip.py
show ip policy
- Added schema and parser for cli
‘show mac address-table dynamic’,
‘show mac address-table dynamic interface {intf_name}’
- Added ShowIpv6OspfDatabase
Added schema and parser for ‘ShowIpv6OspfDatabase’
- Added ShowIpDhcpSnoopingStatisticsDetail parser
Added schema and parser for cli ‘show ip dhcp snooping statistics detail’
- nxos
- added new parser ShowIpDhcpSnoopingBindingDynamicEvpn
Added new parser for the cli “show ip dhcp snooping binding dynamic evpn”
Added new parser for the cli “show ip dhcp snooping binding interface <intf> dynamic evpn”
Added new parser for the cli “show ip dhcp snooping binding vlan <vlan> dynamic evpn”
Added new parser for the cli “show ip dhcp snooping binding interface <intf> vlan <vlan> dynamic evpn”
- added new parser ShowIpDhcpSnoopingBindingStaticEvpn
added new parser for the cli “show ip dhcp snooping binding static evpn”
added new parser for the cli “show ip dhcp snooping binding interface {intf} static evpn”
added new parser for the cli “show ip dhcp snooping binding vlan {vlan} static evpn”
added new parser for the cli “show ip dhcp snooping binding interface {intf} vlan {vlan} static evpn”
- added new parser ShowIpDhcpSnoopingBindingDynamic
Added new parser for the cli “show ip dhcp snooping binding dynamic”
Added new parser for the cli “show ip dhcp snooping binding interface <intf> dynamic”
Added new parser for the cli “show ip dhcp snooping binding vlan <vlan> dynamic”
Added new parser for the cli “show ip dhcp snooping binding interface <intf> vlan <vlan> dynamic”
- added new parser ShowIpDhcpSnoopingBindingStatic
added new parser for the cli “show ip dhcp snooping binding static”
added new parser for the cli “show ip dhcp snooping binding interface {intf} static”
added new parser for the cli “show ip dhcp snooping binding vlan {vlan} static”
added new parser for the cli “show ip dhcp snooping binding interface {intf} vlan {vlan} static”
- added new parser ShowL2routeFhs
added new parser for the cli “show l2route fhs all”
added new parser for the cli “show l2route fhs topology {vlan}”
- added new parser ShowForwardingRouteIpsgVrf
added new parser for the cli ‘show forwarding route ipsg vrf all’
added new parser for the cli ‘show forwarding route ipsg vrf {vrf}’
added new parser for the cli ‘show forwarding route ipsg max-display-count {max_count} vrf {vrf}’
added new parser for the cli ‘show forwarding route ipsg module {ipsg_module} vrf all’
added new parser for the cli ‘show forwarding route ipsg module {ipsg_module} vrf {vrf}’
added new parser for the cli ‘show forwarding route ipsg max-display-count {max_count} module {ipsg_module} vrf all’
added new parser for the cli ‘show forwarding route ipsg max-display-count {max_count} module {ipsg_module} vrf {vrf}’
added new parser for the cli ‘show forwarding route ipsg max-display-count {max_count} vrf all’
- added new parser ShowIpDhcpSnoopingStatistics
added new parser for the cli ‘show ip dhcp snooping statistics’
added new parser for the cli ‘show ip dhcp snooping statistics vlan {vlan}’
- added new parser ShowIpDhcpRelayStatisticsInterfaceVlan
added new parser for the cli ‘show ip dhcp relay statistics interface vlan {vlan}’
- added new parser ShowIpv6DhcpRelayStatisticsInterfaceVlan
added new parser for the cli ‘show ipv6 dhcp relay statistics interface vlan {vlan}’
- Added ShowIpv6RouteSummary
show ipv6 route summary
show ipv6 route summary vrf {vrf}
- iosxr
Added parser for show inventory sparse
Fix
- iosxe
- Modified ShowInterface
Added line
- Modified ShowMonitorCaptureBufferDetailed
Modified schema and parser for’show monitor capture file {path} packet-number {number} detailed’
- Modified ShowPlatformHardwareFpgaSwitch
Modified parser to handle spaces flexibly in the output
Added regular expression p0 which skips the table tile line
- Modified ShowIpDhcpBinding
Added “show ip dhcp binding vrf {vrf_name} {ip_address}” cli
Added “show ip dhcp binding {ip_address}” cli
- Fixed parser ShowLine
Fixed regex pattern for show line for int field to be optional”
- Fix ShowPlatformSoftwareFedActiveMonitor parser
Removed duplicate parser for show platform software fed active monitor and modified the existing parser regex p2 to handle the output of the command.
- cat9k
- c9610
- Fixed parser ShowHardwareLed
Modified the parser regex p6 to handle the output of the command.
Added optional “beacon” keyword to the parser schema.
Fixed the regex p1 for new output.
- rv1
Added few keys for the ShowPlatform parser schema.
Added ‘IE-35’ as part of the condition for lc_type ‘rp’.
- Fixed parser ShowPlatformSoftwareFedSwitchActiveIfmMappingsLpn
Added fed active and fed switch commands to the parser.
- Fixed parser ShSoftwareFed
Added fed active and fed switch commands to the parser.
- Fixed parser ShowPlatformSoftwareFedSwitchActiveCpuInterfaces
Modified switch as optional in the parser.
- Fixed parser ShowPlatformSoftwareFedSwitchActiveIfmMappingsL3if_le
Modified switch as optional in the parser.
- Fixed parser ShowPlatformSoftwareFedSwitchActiveIfmMappingsGpn
Modified switch as optional in the parser.
- Modified ShowPlatformSoftwareFedSwitchActiveSgaclPort parser
Added optional parameters “ingress” and “egress” , modified “interface_state” to be OPtional
Added new regex pattern p2 to accomodate output for sgacl port details for all catalyst platfroms 9200,0300,9400 etc
- Modified ShowPlatformSoftwareFedSwitchActiveAccessSecurityTableSummary
added support parser should work on active and standby
- Modified ShowPlatformSoftwareFedActiveAclBindDbDetail
added support cg_name filed to accepct ! and
- Modified ShowPlatformSoftwareFedSwitchActiveAclBindDbIfid
added support parser should work on active and standby
- Modified ShowPlatformSoftwareFedSwitchActiveAccessSecurityTableUsage
added support parser should work on active and standby
- Modified ShowPowerInline schema and parser to support on IE3K platforms
Modified schema and parser for ‘show power inline interface’ command
- Modify parser ShowRunInterface
Modified URPF Features.
- cat9k
- c9400
Fixed parser show boot to make the standby details optional.
- cat9k
- c9350
- Modified ShowPlatformHardwareFedSwitchQosQueueConfig
modified switch_var to swich_num to match parser under iosxe.
- Modified parser ShowHardwareLed
Enhanced the parser to get LED auto-off status, Added schema and regex pattern <p12_1>
Enhanced the parser to get LED Hardware State, Added schema and regex pattern <p12_2>
- Fix ShowPlatformSoftwareFedSwitchStateIfmIfIdIf_id
Added fed active and fed switch commands to the parser.
- Modify parser ShowCefInterfaceInternal
Added IP unicast RPF check is enabled.
- Fixed parser ShowPlatformSoftwareFedSwitchActiveStatisticsInit
Added fed active and fed switch commands to the parser.
- Fixed parser ShowPlatformSoftwareFedSwitchNumberIfmMappingsPortLE
Added fed active and fed switch commands to the parser.
- Fixed parser ShowPlatformSoftwareFedSwitchActiveIfmInterfacesDetail
Modified switch as optional in the parser.
- Modified ShowRepTopologyDetail
Modified regex to support new device output.
- Modified ShowDiagnosticContentModule
Added parser supprot for ‘show diagnostic content module’ command
Added regular expression p0 which extracts the module number
- Fixed parser ShowWirelessClientMacDetail
Modified current_rate and max_client_protocol_capability to be optional
Allowed space within Device Type (e.g. ‘Un-Classified Device’)
- Fixed parser ShowPlatformSoftwareAccessListSwitchActiveF0Summary
Added parser support for ‘show platform software access-list f0 summary’ command
- nxos
- Fixed parser ShowNveEthernetSegment
Fixed the case where df_vni_list will be populated.
- Modified ShowVdcMembershipStatus
Updated regex <p4> to allow for a space between interface name and status.
- Modified ShowIpRoute
Updated regex pattern <p3> to handle the following cases
- generic
- Modified ShowVersion
Added os_flavor field to the parser output
- iosxr
- Fixed parser ShowInterfacesDetail
Fixed regex pattern p9_3 to match “flow control”