July 2025
July 29 - Genie v25.7
Modules |
Version |
|---|---|
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
|
v25.7 |
Changelogs
genie
Fix
- genie
Refactor plugin loading from pkg_resources.iter_entry_points to importlib.metadata.entry_points
genie.libs.clean
Fix
- stages
Update configure management to check for status of management interface to be up and fail the stage if it is not.
- clean-pkg/stages
- iosxe
Updated the reset configuration to process the config in chunks
- iosxe
Added a separate section to handle the unconfigure ignore startup config
Added logic to check status of previous install commit and perform commit if wasn’t committed
- cat9k
Added a separate section to handle the unconfigure ignore startup config
- clean/stages
Updated DeleteFilesFromServer to automatically access the hostname if not provided explicitly in either DeleteFilesFromServer or CopyToLinux stages.
- stages/iosxe
- connect
Updated logout step to handle login prompts.
- connect
Updated logout step to handle ssh connection issues after logout.
- clean-pkg
Refactor plugin loading from pkg_resources.iter_entry_points to importlib.metadata.entry_points
- iosxe
Fixed issue in
copy_to_devicewhereorigin['files']would raise an error if there were no files.- InstallImage stage
Added new dialog to handle different platform reload patterns
- os/iosxe
- Modified reset configuration
add platform console virtual to platform console virtual in Replace dictionaryå
New
- stages/clean/iosxe
Modified the Rommon Boot stage.
- os/iosxe
- Modified connect
Added logout logic.
- Modified InstallRemoveInactive
Updated loop_continue to True.
genie.libs.conf
genie.libs.filetransferutils
genie.libs.health
genie.libs.ops
genie.libs.robot
genie.libs.sdk
New
- iosxe/cat9k
- c9500x
- Added execute_install_one_shot
API to execute_install_one_shot
- c9610
- Added configure_hw_module_switch_slot_shutdown
API to configure hw-module switch {switch_num} slot {slot} shutdown, hw-module switch {switch_num} subslot {subslot} shutdown.
- Added unconfigure_hw_module_switch_slot_shutdown
API to unconfigure hw-module switch {switch_num} slot {slot} shutdown, hw-module switch {switch_num} subslot {subslot} shutdown.
- iosxe
- Added API to clear_vlan
API to execute clear vlan
- Added execute_clear_zone_pair
API to execute clear zone-pair {subcommand}
Added new api configure_default_cdp_timer
- Added configure_loopdetect
New API to configure loopdetect
- Added unconfigure_loopdetect
New API to unconfigure loopdetect
Added execute_monitor_capture_match_any_interface_both
Added execute_show_monitor_capture_buffer_brief
- Added execute_show_platform_hardware_qfp_active_feature_alg_statistics_sip_l7_data_clear
New API to execute show platform hardware qfp active feature alg statistics sip l7data clear
- pki
execute_monitor_event_trace_crypto_pki
- Added API unconfigure_flow_record_from_monitor
API to unconfigure_flow_record_from_monitor.
- Added configure_flow_record_with_match
API to Configures Flow record with match values on Device
- Added configure_flow_record_with_collect
API to Configures Flow record with collect values on Device
- pki
Added remove_pki_certificate_chain
- Added configure_remote_span_monitor_session
API to configure_remote_span_monitor_session
- Added API execute_diagnostic_start_module_port
Added API to execute_diagnostic_start_module_port
- pki
Added configure_trustpool_clean
Added unconfigure_trustpool_clean
- Added API get_show_flow_monitor_cache_format_table_output
API to get_show_flow_monitor_cache_format_table_output.
- Added API configure_Usb
API to enable usb
- Added API unconfigure_Usb
API to disable usb
- Added configure_controller_vdsl
Added configure_controller_vdsl to configure controller vdsl
Added API to configure facility alarm power-supply disable
Added API to unconfigure facility alarm power-supply disable
Added API to configure facility alarm power-supply notify
Added API to unconfigure facility alarm power-supply notify
Added API to configure facility alarm power-supply relay
Added API to unconfigure facility alarm power-supply relay
Added API to configure facility alarm power-supply syslog
Added API to unconfigure facility alarm power-supply syslog
- IE3k
Added API to configure facility alarm sdcard enable
Added API to unconfigure facility alarm sdcard enable
Added API to configure facility alarm sdcard notify
Added API to unconfigure facility alarm sdcard notify
Added API to configure facility alarm sdcard relay
Added API to unconfigure facility alarm sdcard relay
Added API to configure facility alarm sdcard syslog
Added API to unconfigure facility alarm sdcard syslog
- ie3k
Added new api configure_power_supply_dual
Added new api unconfigure_power_supply_dual
- Added API simulate_partition_sdflash
API to simulate partition of sdflash
- Added API simulate_format_sdflash
API to simulate format of sdflash
- sdk/iosxe
- rommon/configure
Added the ability to specify an image path that takes precedence over device clean image
- iosxe/platform
Added execute_rommon_reset api
- iosxe/asr1k
Added execute_set_config_register api
Added execute_rommon_reset api
- iosxe/isr4k
Added execute_set_config_register api
Added execute_rommon_reset api
- configure
Added new apis configure_autoboot and configure_boot_manual.
Fix
- cleaning api ut’s
- Iosxe
- Updated with latest UT method to all of the below mentioned API UT’s
configure_ip_role_based_acl
configure_ip_subnet_to_sgt_mapping_vrf
configure_ip_to_sgt_mapping_vrf
cts_refresh_environment_data
cts_refresh_pac
cts_refresh_policy
- Iosxe
- Updated with latest UT method to all of the below mentioned API UT’s
configure_label_mode_all_explicit_null
configure_ospf_internal_external_routes_into_bgp
configure_ospf_redistribute_in_bgp
configure_redestribute_ospf_metric_in_bgp
configure_redistribute_connected
configure_route_map_route_map_to_bgp_neighbor
- Iosxe
- Updated with latest UT method to all of the below mentioned API UT’s
configure_cts_enforcement_interface
configure_cts_enforcement_logging
configure_cts_role_based_monitor
configure_cts_role_based_permission
configure_cts_role_based_permission_default
configure_host_ip_to_sgt_mapping
- Iosxe
- Updated with latest UT method to all of the below mentioned API UT’s
configure_sdm_prefer
configure_sdm_prefer_core
configure_sdm_prefer_custom_fib
configure_sdm_prefer_custom_template
debug_platform_memory_fed_backtrace
debug_platform_memory_fed_callsite
debug_platform_software_fed_drop_capture
debug_platform_software_fed_drop_capture_action
debug_platform_software_fed_drop_capture_buffer
- updated api unit tests
- IOSXE
- Updated unittests to new testing method
configure_router_bgp_maximum_paths
configure_router_bgp_neighbor_ebgp_multihop
configure_router_bgp_neighbor_remote_as
- IOSXE
- Updated unittests to new testing method
configure_avb
unconfigure_avb
configure_bfd_neighbor_on_interface
disable_bfd_on_isis_ipv6_address
enable_bfd_on_isis_ipv6_address
unconfigure_bfd_neighbor_on_interface
unconfigure_bfd_on_interface
unconfigure_bfd_value_on_interface
- iosxe
- policy map priority express api
modified the api logic to get the percent key value from the correct level of the parsed output.
added the percent key value to the api output.
modified the api to get the kbps value from the correct level of the parsed output.
added the kbps key value to the api output.
- Api Health CPU
modfied the api logic to get the five_sec_cpu key value from the correct level of the parsed output.
- Modified config_extended_acl
Added a logging statement for ACLs
- Modified configure_ip_acl
Added a logging statement for ACLs
- Modified configure_ip_acl_with_any
Added a logging statement for ACLs
- Modified configure_ipv4_ogacl_src_dst_nw
Added a logging statement for ACLs
Added a port type and port number arguments
- Added configure_generic_command
Added a new UT method to configure generic commands
- Updated with latest UT method to all of the below mentioned API UT’s
config_extended_acl
configure_ip_acl
configure_ip_acl_with_any
configure_ipv4_ogacl_src_dst_nw
- Modified Acmsave
Added a dialog statement for overwrite
- Modified perform_telnet API
Handled Telnet authentication failure scenarios
Ensured False is returned when prompt is not reached, authentication fails or login fails
- Modified perform_ssh API
Handled ssh authentication failure scenarios
Ensured False is returned when prompt is not reached, authentication fails or login fails
- Modified
Updated configure_span_monitor_session API with optional argument vlan id to configure the vlan monitor session as source.
- sdk-pkg
moved the proxy disconnect to execute api
- sdk
- Blitz
- Yang
Added option to run gNMI subscribe in async mode
- sdk/iosxe
- management/configure
Update configure_management_credentials api to remove enable secret and re-configure the password
- utils
- copy to device
Fixed server block resolution to strictly match protocol and address in copy_to_device.
- iosxe/rommon/utils
Updated device_rommon_boot api to handle boot from rommon for stack devices.
Updated device_rommon_boot api to execute config register and reset command.
Updated device_rommon_boot api to handle grub prompts.
- iosxe/platform
Updated execute_set_config_register api
- iosxe/cat9k
Updated unconfigure_ignore_startup_config
- os/iosxe/cat9k/c9300/configure
update configure_ignore_startup_config and unconfigure_ignore_startup_config api to handle dual rp and stack devices
- os/iosxe/cat9k/c9500/configure
update configure_ignore_startup_config and unconfigure_ignore_startup_config api to handle dual rp and stack devices
- os/iosxe/rommon
update configure_rommon_tftp_ha to use image handler to update TFTP_FILE
Modify
- iosxe
- Modify verfify_iox_enabled
Modified api to check list of services in ‘running’ state to check iox enabled in device .
genie.libs.parser
New
- iosxe
- Added Parser for parsers for below commands
show platform hardware qfp active feature firewall drop clear
show platform hardware qfp active feature firewall datapath scb any any any any any all any
show platform hardware qfp active feature firewall datapath scb any any any any any all any detail
- Added Show pki commands
show crypto pki counters
show crypto pki trustpool count downloaded
show monitor event-trace crypto pki event all
show logging process ios module pki level notice
show monitor event-trace crypto pki error all
show platform software trace level ios rp active | in pki
- Added ShowDebug
Added schema and parser for ‘show debug’ command.
- Added ShowEnvironmentalTemperatureAll
Added schema and parser for ‘show environmental temperature all’ command.
- Added Parser for show facility-alarm relay major
Added a new schema and parser for the show facility-alarm relay major command.
- Added ShowPlatformDiag
show platform diag
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightSanetClientDefinition parser
Added schema and parser for show platform hardware fed switch active fwd asic insight sanet client definition
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightSanetClientAcl parser
Added schema and parser for show platform hardware fed switch active fwd asic insight sanet client acl
- Added Parser for parsers for below commands
show policy-firewall config
show policy-firewall config zone-pair in-out
- Modified show inventory parser
Modified the regex patterns to support new output format
- Modified show platform resources parser
Modified the parser schema to support new output format
- Added ShowPlatformHardwareQfpActiveFeatureAlgStatisticsDns
show platform hardware qfp active feature alg statistics dns
show platform hardware qfp active feature alg statistics dns {clear}
- Added ShowPlatformHardwareQfpActiveFeatureAlgStatisticsSmtp
show platform hardware qfp active feature alg statistics msrpc
show platform hardware qfp active feature alg statistics msrpc {clear}
- Added ShowPlatformHardwareQfpActiveFeatureAlgStatisticsPop3
show platform hardware qfp active feature alg statistics pop3
- Added ShowPlatformSoftwareNatIpalias
show platform software nat ipalias
- Added ShowMonitorEventTraceCryptoIpsec
show monitor event-trace crypto ipsec event latest
show monitor event-trace crypto ipsec event back 110
- Added ShowMonitorEventTraceCryptoLatestDetail
show monitor event-trace crypto latest detail
- Added ShowMonitorEventTraceCryptoMerged
show monitor event-trace crypto merged {word} {lines_count} {detail}
show monitor event-trace crypto merged {word} {detail}
show monitor event-trace crypto merged {word}
- Added ShowPlatformHardwareFedActiveFwdAsicInsightHcamUsageSlice Parser
Added schema and parser for cli “show platform hardware fed {state} fwd-asic insight hcam_usage(1,1) | begin Slice”
- Added ShowPlatformSoftwareFedSwitchActiveEtherchannelLoadbalanceProtocolsSchema
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-fl-nh-port-v6 {sourcemac} {destinationmac}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-fl-nh-v6 {sourcemac} {destinationmac} {flow_label} {next_header}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-protocol-port-v4 {source} {destinatio} {protocol} {sour_port} {dest_port}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance ip-protocol-v4 {source} {destination} {protocol}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-addr {sourcemac} {destinationmac}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-fl-nh-port-v6 {sourcemac} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header} {sour_port} {dest_port}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-fl-nh-v6 {sourcemac} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header}’
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-protocol-v4 {sourcemac} {sourceip} {destinationip} {protocol}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-ip-protocol-port-v4 {sourcemac} {sourceip} {destinationip} {protocol} {sour_port} {dest_port}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-fl-nh-port-v6 {sourcemac} {vlan_id} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header} {sour_port} {dest_port}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-fl-nh-v6 {sourcemac} {vlan_id} {sourceipv6} {destinationipv6} {ipv6_fl} {next_header}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-protocol-port-v4 {sourcemac} {vlan_id} {sourceip} {destinationip} {protocol} {sour_port} {dest_port}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlan-ip-protocol-v4 {sourcemac} {vlan_id} {sourceip} {destinationip} {protocol}’,
Added parser for cli ‘show platform software fed switch {switch} etherchannel {portchannelnum} load-balance mac-vlanid {sourcemac} {vlan_id}’.
- Added ShowEnvironmentAll schema in iosxe/ie3k
Added parser for show environment all in iosxe/ie3k
- Added ShowEnvironmentPower schema in iosxe/ie3k
Added parser for show environment power in iosxe/ie3k
- Added ShowEnviornmentTemperature schema in iosxe/ie3k
Added parser for show environment temperature in iosxe/ie3k
- Added ShowEnvironmentAlarmContact schema in iosxe/ie3k
Added parser for show environment alarm contact in iosxe/ie3k
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicTrapsTmTrapsAsic schema and parser
Added parser for show platform hardware fed {switch} {state} fwd-asic traps tm-traps asic {asic}
- Added show acm rules parser
Parse “show acm rules”
- Added acm replace validate parser
Parse “acm replace flashday1 validate”
- Added ShowCtsHaSyncStatus parser
Added schema and parser for cli “show cts ha sync-status”
- Added ShowCtsProvisioningQueue parser
Added schema and parser for cli “show cts provisioning queue”
- Added ShowIpPolicy
Add parser for ‘show ip policy’ in revision 1
- Added ShowIpv6MfibCount Parser
Parser for ‘show ipv6 mfib count’
- Added ShowMacsecStatusInterface
Added schema and parser for show macsec status interface {interface}
Added show platform hardware fed switch {switch_id} fwd-asic insight ifm_ingress_vlan_member_tbl({npp_attrib_index},{vlan_id},{stp_learn_type},{stp_state_block})
Added show platform hardware fed switch {switch_id} fwd-asic insight l2_attachment_circuit_l2(lag_gid={lag_gid})
Added supported for zbfw feature for ShowPlatformPacketTracePacket
- Added ShowPolicyMapTypeInspectZonePairSessions
- show policy-map type inspect zone-pair {zone_pair_name} sessions
show policy-map type inspect zone-pair sessions
- Added ShowPolicyMapTypeInspectZonePairSession
show policy-map type inspect zone-pair {zone_pair_name} session
- Added ShowFirmwareVersionAll
Added schema and parser for ‘show firmware version all’ command.
- Added Parser for show interface transceiver properties
Added a new schema and parser for the show interface transceiver properties command.
Added ShowDiagSubslotEepromDetail
‘show diag subslot 0/1 eeprom detail’
Added ShowHwModuleSubslotEntity
‘show hw-module subslot 0/1 entity’
Added Parser ShowIpNatPoolName in show_ip.py
show ip nat pool name {pool_name}
- Added Parser for show loopdetect
Added a new schema and parser for the show loopdetect command.
Added ShowMplsTrafficEngLinkManagementSummary parser in show_mpls.py
Added schema and parser for cli ‘show mpls traffic-eng link-management summary’
- Added ShowNat64MapT parser in show_nat.py
Added schema and parser for cli ‘show nat64 map-t’
- Added ShowNat64MapTDomain parser in show_nat.py
Added schema and parser for cli ‘show nat64 map-t domain <domain_id>’
- Added ShowNat64MappingsStaticTcp parser in show_nat.py
Added schema and parser for cli ‘show nat64 mappings static tcp’
- Added ShowNat64MappingsStaticKeyPort parser in show_nat.py
Added schema and parser for cli ‘show nat64 mappings static key-port {port}’
- Added ShowNat64MappingsStaticKeyAddress parser in show_nat.py
Added schema and parser for cli ‘show nat64 mappings static key-address {address}’
Added ShowIpNatLimitsAllHost
‘show ip nat limits all-host’
Added ShowParameterMapTypeInspectZone
‘show parameter-map type inspect-zone {zone_name}’
Added show parameter-map type inspect-global parser
Added ShowParameterMapTypeInspectVrf
‘show parameter-map type inspect-vrf test_vrf’
- Added ShowPlatformFedStandbyTcamUtilization
Parser for ‘show platform hardware fed standby fwd-asic resource tcam utilization’
Added ShowPlatformHardwareQfpActiveFeatureAlgStatisticsSipClear
‘show platform hardware qa active fe alg sta sip clear
- Added ShowPlatformHardwareQfpActiveFeatureAlgStatisticsSipL7data
show platform hardware qfp active feature alg statistics sip l7data
- Added ShowPlatformSoftwareFirewallRPActiveVrfPmapBinding
show platform software firewall RP active vrf-pmap-binding
show platform software firewall FP active vrf-pmap-binding
- Added class ShowPolicyFirewallStatsVrf parser in show_policy_firewall.py
Added schema and parser for cli ‘show policy-firewall stats vrf {vrf}’
- Added ShowPolicyFirewallStatsZone parser in show_policy_firewall.py
Added schema and parser for cli ‘show policy-firewall stats zone {zone}’
Added ShowIpWccpWebCacheClients parser in show_ip.py
Added schema and parser for cli ‘show ip wccp web-cache clients’
Added ShowMplsTrafficEngFastRerouteDatabase parser in show_mpls.py
Added schema and parser for cli ‘show mpls traffic-eng fast-reroute database’
show platform hardware qfp active feature alg statistics pop3 {clear}
- iosxr
- Added ShowControllersOpticsAppselActive
Added schema and parser for ‘show controllers optics {port} appsel active’ command.
- Added ShowImDatabaseBriefLocation
Added schema and parser for ‘show im database brief location {location}’ command.
Added schema and parser for ‘show im database brief location all’ command.
Add
- iosxr
- Added ShowCryptoPkiCertificates in rv1
Added ShowCryptoPkiCertificates in rv1 for supporting multiple ca_certificates
- iosxe
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicInsightAclTableRules parser
Added schema and parser for ‘show platform hardware fed switch active fwd-asic insight acl-table-rules’ command
- Modified ShowEtherchannelPortChannel parser
Added optional keys in schema
Added new parser for ‘show facility-alarm status’ command
Modified
- iosxe
- Modified ShowPlatformFedActiveTcamUtilization parser
Added new cli command ‘show platform hardware fed active fwd-asic resource tcam utilization {asic} slice-id {slice_id}’
- Modified ShowPlatformHardwareFedSwitchActiveFwdAsicInsightVrfPorts parser
Split parser into two separate classes for different command formats
- Modified ShowPlatformHardwareFedSwitchActiveFwdAsicInsightVrfRouteTable parser
Fixed parsing logic to ensure all values from the output are included in the returned dictionary.
Improved handling of edge cases and verified parsing against multiple output
Fix
- iosxe
- Modified ShowVersion
Added is_standby argument to the parser to execute the show version command on the standby device
- Modified fix for ShowSoftwareAuthenticityRunning parser.
Modified the regex pattern to fetch all the fields’.
- Modified fix for ShowControllersEthernetControllersPhyDetail parser.
Modified the regex to match all necessary patterns’.
- Modified fix for ShowControllerEthernetControllerLinkstatus parser.
Modified the schema to support all the output’.
- Modified fix for ShowControllerEthernetControllerInterfaceMac parser.
Modified the schema to support all the output’.
- Added ShowPlatformSoftwareCpmSwitchActiveB0PacketsControlIpc parser.
Added parser for cli ‘show platform software cpm switch {mode} BP {mode2} packets {controlmode} {transmitmode}’.
- Modified fix for ShowPlatformHardwareFedNpuDscDump parser.
Modified the schema to support all the output’.
- Added ShowPlatformHardwareFedSwitchActiveNpuSlotPortLinkstatus parser.
Added parser for cli ‘show platform hardware fed switch {mode} npu slot 1 port {port_num} link_status’.
- Removed ShowPlatformHardwareFedSwitchActiveNpuSlotPortLinkstatus parser.
Removed duplicate parser for resolving conflict.
- Modified ShowApConfigGeneral
Modified schema ‘show ap config general’ to also allow int return type for ‘rogue_ap_minimum_rssi’
- Modified ShowControllersEthernetControllerPortInfo
Modified regex p5
- Added support ShowCryptoIpsecSaDetail
Changes made for <p1> regex to match
GigabitEthernet0/0/0
- Modified ShowIssuStateDetail parser
Fixed regex p19 to capture “In Progress” status
- Modified ShowPlatformSoftwareFedQosInterfaceSuperParser parser
Fixed regex p7 to capture “Asic” number
- Modified ShowPlatformHardwareFedSwitch1FwdAsicInsightIfmLagMembers parser
- Modified parser for CLI
‘show platform hardware fed switch {switch_id} fwd-asic insight ifm_lag_members({lag_gid})’
‘show platform hardware fed {switch} {switch_id} fwd-asic insight ifm_lag_members({lag_gid})’
- Modified parser for arguments
‘switch_id‘“1” to ‘switch_id‘“Any”
Modified regex pattern (p1) to correctly handle empty or missing ‘sysport_cookie’ values, ensuring all LAG members are parsed even if some fields are empty.
- Added test output for the parser
‘show platform hardware fed switch 1 fwd-asic insight ifm_lag_members(lag_gid=263)’
- Modified ShowPlatformHardwareFedSwitchActiveFwdAsicInsightVrfProperties parser
- Modified parser for CLI
‘show platform hardware fed switch {switch_type} fwd-asic insight vrf-properties’,
‘show platform hardware fed {switch} {switch_type} fwd-asic insight vrf-properties’
- Modified parser for arguments
‘switch‘“Any” to ‘switch_type‘“Any”
- Modified ShowPlatformSoftwareFedSwitchQosPolicyTargetStatus parser
fix the logic to handle the cli_command
Added few fields to ‘show hardware led’ command output
Fix for show hardware led state
- Modified ShowAlarmSettings
- Modified the parser to include the following fields
Rep
License-File-Corrupt
Alarm Logger Level
- Modified parser ShowPlatformHardwareFedSwitchActiveFwdAsicInsightS1SgtMappingStatusV4 and ShowPlatformHardwareFedSwitchActiveFwdAsicInsightS1SgtMappingStatusV6
changed ‘switch’ and ‘mode’ as variables for flexibility
- Modified ShowProcessesPid
Updated regex pattern <p1> to allow “-” in the process name.
Updated regex pattern <p7> to allow “()” in the process state.
- Modified parser ShowPlatformSoftwareFedSwitchActiveSecurityFedDhcpSnoopVlanDetail
Updated the parser to handle the new output format for DHCP snooping VLAN details.
Modified ShowIpNatTranslationUdpTotal
‘show ip nat translations {protocol} total’ #Added support to handle both tcp/udp protocol.
- iosxr
- Modified ShowControllersOptics
Added regex for new fields host_squelch_status, media_linkdown_pre_fec_degrade, power_mode, dom_data_status, last_link_flapped, loopback_host, loopback_media & hardware_version
Fix regex for ‘controller_state’ field
- Modified ShowControllersOptics
Added schema and parser for the ‘show controllers optics *’ command
- Modified ShowControllersOpticsDb
Added schema and parser for the ‘show controllers optics * db’ command
- Modified ShowControllersOpticsDwdmCarrierMap
Added schema and parser for the ‘show controllers optics * dwdm-carrier-map’ command
- Modified ShowControllersOpticsFecThresholds
Added schema and parser for the ‘show controllers optics * fec-thresholds’ command
- nxos
- Modified ShowNveInterfaceDetail
Fixed regex pattern for multisite dci-advertise-pip configuration.
Enhanced regex patterns to accommodate whitespace in CLI output.
Update
- iosxe
- Updated ShowIpv6MldGroupsDetail Parser for
Parser for ‘show ipv6 mld groups <group> <interface> detail’