September 2025

September 30 - Genie v25.9

New Module Versions

Modules

Version

genie

v25.9

genie.libs.health

v25.9

genie.libs.clean

v25.9

genie.libs.conf

v25.9

genie.libs.filetransferutils

v25.9

genie.libs.ops

v25.9

genie.libs.parser

v25.9

genie.libs.robot

v25.9

genie.libs.sdk

v25.9

genie.telemetry

v25.9

genie.trafficgen

v25.9

Changelogs

genie

genie.libs.clean

Fix
  • stages/iosxe
    • connect

      • Added optional logout argument (default True) to accommodate various scenarios.

  • iosxe
    • Modified InstallImage

      • Added logic to handle ISSU in progress scenario.

    • Fixed the logic of InstallRemoveSmu stage and added support to handle uncommitted SMU images

  • clean
    • IOSXE/cat9k

      • Update clean install images to use execute service and pass install timeout.

    • IOSXE/cat9k

      • Update clean install images to do configure no boot manual on the device.

  • iosxe/cat9k/install_image

    • Added ‘rommon_vars’ to install_image stage to support setting rommon variables when booting an image in rommon mode.

  • iosxe/install_image

    • add image_to_boot to install image

  • clean-pkg

    • Fix syntax warning

    • Added support for matching interfaces by alias in ConfigureInterfaces.

  • iosxe/connect

    • Removed duplicate configure boot manual in connect stage.

genie.libs.conf

Fix
  • conf-pkg

    • Fix syntax warning

  • nxos
    • Added support for 2 new clis

      • Added frr anycast source ip support in conf model

      • Added ead-evi route support in conf model

    • Modified

      • update issu trigger command to min-disruptive based on marketing feedback.

genie.libs.filetransferutils

genie.libs.health

Fix
  • health-pkg

    • Fix syntax warning

genie.libs.ops

genie.libs.robot

genie.libs.sdk

New
  • iosxe
    • Added execute_test_platform_hardware_sensor_value

      • API to execute_test_platform_hardware_sensor_value

    • Added enable_cts_sxp

    • Added disable_cts_sxp

    • Added configure_cts_sxp_default_password

    • Added unconfigure_cts_sxp_default_password

    • Added enable_cts_sxp_connection

    • Added disable_cts_sxp_connection

    • Added API to get the maximum and minimum temperature from the device alarm settings.

    • cat8k

      • Added api to configure no boot manual

    • c8kv

      • Added api to configure no boot manual

    • Added execute_clear

      • API to execute clear {parameter}

    • Added API configure_ipv6_cef

    • Added API unconfigure_ipv6_cef

    • Modified API configure_standard_access_list

      • Made ‘wild_mask’ as optional argument.

    • Modified API unconfigure_standard_access_list

      • Made ‘wild_mask’ as optional argument.

    • Added API to configure/unconfigure Relay mode negative

    • Added API test_platform_hardware_powersupply_oir

      • Added API for doing PSU OIR

    • cat9kv

      • Added API test_platform_hardware_chassis_fantray_action

      • Added API configure_autolc_shutdown_priority

    • Added clear_cts_environment_data

      • API to clear cts environment-data

    • Modified configure_ip_role_based_acl

      • Added support for source and destination port range

    • Added API unconfig_trust_points

      • Added API to unconfig_trust_points

    • IKE

      • configure_isakmp_key_simple

      • unconfigure_isakmp_key_simple

    • Added API execute_hw_module_beacon_fan_tray

    • Added API execute_hw_module_subslot_oir

    • Added API configure_platform_ip_multicast_ssdp

    • Added API unconfigure_platform_ip_multicast_ssdp

    • Added API to configure alarm profile

    • Added API to unconfigure alarm profile

      • Added support for configuring alarm profiles with options such as contact, severity, description, name, trigger, and type.

      • The API allows setting the configuration options to ‘no’ and specifying the expected settings for power supply alarms.

      • Added support for configuring and unconfiguring notifications for alarm profiles.

      • Added support for configuring and unconfiguring relay settings for alarm profiles.

      • Added support for configuring and unconfiguring syslog settings for alarm profiles.

    • Added API configure_extended_access_list

      • Added API to configure_extended_access_list

    • Added API configure_ptp_ttl

    • Added API unconfigure_ptp_ttl

    • Added execute_trim_crypto_pki_certificate

      • API to execute_trim_crypto_pki_certificate

    • Added config API configure_ikev2_disconnect_revoked_peers

    • Added API to configure facility alarm temperature primary

      • Added support for configuring the primary temperature threshold for facility alarms.

      • The API allows setting the temperature threshold to ‘high’ and specifying the value.

    • Added API to unconfigure facility alarm temperature primary

      • Added support for unconfiguring the primary temperature threshold for facility alarms.

      • The API allows removing the temperature threshold configuration.

      • Added support for configuring and unconfiguring notifications for primary temperature alarms.

      • Added support for configuring and unconfiguring relay settings for primary temperature alarms.

      • Added support for configuring and unconfiguring syslog settings for primary temperature alarms.

    • Added API configure_with_submode

      • Added API to configure_with_submode

    • Added API configure_with_submode

      • Added API to configure_with_submode

  • iosxe/cat9k
    • c9400

      • Added new api to execute config register

Fix
  • iosxe

    • Fixed issue with ‘question mark’ not working in certain command modes.

    • Unconfigure_banner

      • Added fix for Unconfigure_banner to make it compatible

    • Modified

      • Added support for handling reload triggered by %PMAN-5-EXITACTION reload action requested

  • sdk-pkg

    • Fix syntax warning

  • iosxe/sdk-pkg

    • Updated the configure management vrf api

Modify
  • iosxe
    • Added logic for to execute log messages

      • Added logic for to execute log messages beased on the edit operations

    • Modified unconfigure_modify_ikev2_profile

      • Modified the api unconfigure_modify_ikev2_profile

    • Modified configure_radius_group

      • Modified the configure_radius_group to add changes for ipv6 source interface.

genie.libs.parser

New
  • iosxe
    • Added parser for ShowMonitorEventTraceCryptoIpsecEventAll

      • ‘show monitor event-trace crypto ipsec event all’

    • Added ShowPlatformHardwareQfpActiveFeatureIpsecSa3

      • Added schema and parser for ‘show platform hardware qfp active feature ipsec sa 3’

    • Added ShowIdpromFantrayEepromDetail schema and parser

      • Added schema and parser for show idprom fan-tray {fantray_num} eeprom detail

    • Added ShowPlatformHardwareQfpActiveFeatureFirewallDrop

      • show platform hardware qfp active feature firewall drop

      • show platform hardware qfp active feature firewall drop all

      • show platform hardware qfp active feature firewall drop clear

      • show platform hardware qfp active feature firewall drop verbose

    • Added ShowL2tp

      • show l2tp

    • Added ShowPlatformHardwareQfpActiveFeatureNatDatapathGate parser.

      • Added parser for cli ‘show platform hardware qfp active feature nat datapath gatein’.

      • Added parser for cli ‘show platform hardware qfp active feature nat datapath gateout’.

    • Modified ShowInterfacesTransceiverSupportedlist

      • Added new Cisco p/n min format parser for show interfaces transceiver supported list

    • Added ShowMonitorEventTraceCryptoAllDetail Parser for

      • Parser for ‘show monitor event-trace crypto all detail’

    • Added ShowMonitorEventTraceCryptoFromBoot Parser for

      • Parser for ‘show monitor event-trace crypto from-boot’

      • Parser for ‘show monitor event-trace crypto from-boot {timer}’

    • Added Parser for show platform hardware cpp active system state

      • Added a new schema and parser for the show platform hardware cpp active system state command.

      • Supports parsing CPP system state information including component status, platform state, HA state, client state, image information, load count, active threads, and fault manager flags.

      • Handles component initialization status (cpp_cp, cpp_sp, FMAN-FP, cpp_driver0).

      • Parses hierarchical state information with proper data type conversion.

    • Added ShowVlans

    • ‘show vlans <vlan-id>’

    • Added ShowPlatformHardwareQfpActiveFeatureNatDatapathEsp schema and parser

      • Added schema and parser for show platform hardware qfp active feature nat datapath esp

    • Added ShowPlatformHardwareChassisRpFanSpeedControlData

    • Added parser for Show Platform Hardware Chassis Rp FanSpeedControlData

    • Added parser for hw-module beacon fan-tray fantray_num status

    • Added ShowX25Vc parser in show_x25.py

      • Added schema and parser for cli ‘show x25 vc’

    • Added ShowPlatformSoftwareNatFpActiveMappingStatic

      • Added ShowPlatformSoftwareNatFpActiveMappingStaticSchema

      • Added parser for “show platform software nat fp active mapping static”

    • Added ShowCefTableConsistencyCheck parser in show_cef.py

      • Added schema and parser for cli ‘show cef table consistency-check’

    • Added parser for ShowAlignment

      • ‘show alignment’

    • Added ShowMkaSessionDetail
      • show mka session detail

        • New*

    • Added** ShowCtsCredentials parser.*

      • Added parser for cli ‘show cts credentials’.**

    • Added ShowRunningConfigVrf

      • show running-config vrf

    • Added ShowPlatformHardwareQfpActiveFeatureFirewallRuntime

      • show platform hardware qfp active feature firewall runtime

    • Added ShowPlatformSoftwareFirewallRPActiveZones

      • sh ipv6 mfib {group} active

    • Modified ShowVoiceDsp

      • show voice dsp

    • Added ShowPlatformHardwareQfpActiveFeatureTdDatapathStatistics parser

      • Added schema and parser for ‘show platform hardware qfp active feature td datapath statistics’

    • Added ShowPlatformHardwareQfpActiveFeatureEvcClientL2cpActionsInterface

    • ‘show platform hardware qfp active feature evc client l2cp-actions interface GigabitEthernet0/0/4.EFP1’

    • Added ShowRomMonitor parser in show_romvar.py

      • Added schema and parser for cli ‘show rom-monitor 0’

    • Added ShowIpBgpNeighborReceivedPrefixFilter schema and parser

      • Added schema and parser for show ip bgp neighbors {neighbor} received prefix-filter and show ip bgp {address_family} vrf {vrf} neighbors {neighbor} received prefix-filter

    • Added ShowPlatformHardwareChassisFantrayDetailAll

      • Added parser for “show platform hardware chassis fantray detail all”

    • Added ShowPowerDetail

      • Added schema and parser for’show power detail’ under 9610c folder for iosxe

  • iosxr
    • Added ShowSubscriberSessionAllSummary Parser

      • Added schema and parser for show subscriber session all summary command.

    • Added Parsers for below OSPFv3 show commands

      • show ospfv3 vrf all-inclusive database ext-router

      • show ospfv3 topology detail

      • show ospfv3 topology prefixes

    • Added Parsers for below lslib_server show commands

      • show lslib server producer detail

      • show lslib server producer {name} instance-id {id}

      • show lslib server topology-db protocol ospfv3 instance-id {id} nlri-type node detail

      • show lslib server topology-db protocol ospfv3 instance-id {id} nlri-type link detail

      • show lslib server topology-db protocol ospfv3 instance-id {id} nlri-type ipv6-prefix detail

  • nxos
    • Added ShowKeyChain parser.

      • Added parser for cli show key chain {key_chain_name}.

      • Added parser for cli show key chain {key_chain_name} detail.

Fix
  • iosxe
    • Added fix for ShowPlatformHardwareFedSwitchFwdAsicInsightAclTableDef parser.

      • Added this fix to support multiple acl_entries.

    • Modified ShowInterfaceEtherchannel

      • ‘show interface {interface_id} etherchannel’

    • Modified ShowInterfaces

    • ‘show interfaces Serial0/3/1’

    • genie.libs.parser.iosxe.rv1.show_platform

      • Added regex to parse platform output when model, hw_ver and sw_ver are N/A

    • Modified ShowPolicyMapTypeInspectZonePairSessions

      • ‘show policy-map type inspect zone-pair sessions’

    • Modified ShowPlatformPacketTracePacket

      • ‘show platform packet-trace packet {packet_id}’

    • Added YANG parser for ShowSystemIntegrityAllCompliance

    • Modified ShowPlatformHardwareAuthenticationStatus

      • Added missing optional attributes to schema for 10-slot chassis.

    • Modified ShowStandbyAll parser

      • Updated regex for the state changes line and improved parsing of the last state change time to accommodate various output formats.

  • iosxr
    • Modified ShowPlatform for ASR-9903 with IOS-XR v7.8.2
      • Updated regex pattern <p1> to accommodate various outputs

        • Changed whitespace before <plim> to use s+ (was a single space) for variable spacing.

        • Made <config_state> optional by wrapping it in a non-capturing group.

      • Ensures lines without a “Config state” column are parsed (e.g., 0/0/1             A9903-20HG-PEC             OK).

  • nxos
    • Fixed ShowEnvironmentPowerDetail parser.

      • Fixed parser for cli show environment power detail.

Modified
  • iosxe
    • Modified show environment power cache parser in iosxe/ie3k

      • Modified parser for show environment power in iosxe/ie3k

    • Updated ShowUACUplinkDB parser

      • Added support for “IPV4 Preferred Uplink” and “IPV6 Preferred Uplink”.

      • Added support for optional “Allowed” field in interface tables.

      • Improved parsing logic for various output formats.

    • Modified ShowIpRouteWord parser

      • Fixed p5 where the parser was not correctly handling routes with specific keywords such as “directly connected” and “via”.

      • Fixed p8 where the parser was not correctly capturing the metric and next-hop information for certain route types.

    • Modified ShowIpPolicy parser

      • Added support for IPv6 policy parsing in addition to existing IPv4 policy parsing.

  • fix resolve syntaxwarnings from invalid escape sequences

    • Updated regex patterns to use raw strings (r”…”) or escaped backslashes

    • Eliminated SyntaxWarnings (e.g., ‘d’, ‘S’) during runtime

Modify
  • iosxe
    • Modified ShowEnvironmentAlarmContact in iosxe/ie3k

      • Modified parser for “show environment alarm-contact” in iosxe/ie3k

genie.telemetry