August 2025
August 23 - Genie v25.8
Modules |
Version |
|---|---|
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
|
v25.8 |
Changelogs
genie
Fix
- genie
- Added retry functionality to the harness connect method with parameters
retry Boolean flag to enable retry functionality
retry_max_time Maximum time in seconds to retry connection (default 300)
retry_interval Time interval in seconds between retries (default 30)
Fix tgn-disable-regenerate-traffic argument default value from True to False
genie.libs.clean
Fix
- iosxe/copy_to_device
Added md5 verification before copying the image to the device.
- stages
Install image reloads to Press Enter key add a statement to handle return key after the image reloads.
- iosxe
Modified clean connect to handle exhaused credentials error and trigger password recovery
- clean-pkg
Added delay after applying configuration to the device
- iosxe
Updated the logic to work for ha/stack device in install image and install SMU stages
Increased the timeout to 3 minutes since by default the image take time to be applied.
- iosxe/connect
Removed duplicate configure rommon variable in connect stage.
genie.libs.conf
Fix
- nxos
- Modified Service-Acceleration
Added service vlan keys to service-acceleration conf model
genie.libs.filetransferutils
genie.libs.health
genie.libs.ops
genie.libs.robot
genie.libs.sdk
New
- iosxe
- Added configure_pvlan_for_input_service_policy
API to Configures private VLAN settings on an input interface.
- Added configure_pvlan_for_output_service_policy
API to Configures private VLAN settings on an output interface.
Added configure_extended_acl_with_dscp
- Added configure_rep_segment_auto
API to configure_rep_segment_auto
- Added configure_fastrep_segment_auto
API to configure_fastrep_segment_auto
- Added unconfigure_call_home_profile_destination_transport_method
API to unconfigure_call_home_profile_destination_transport_method
Added config API configure_crypto_isakmp_profile
Added config API unconfigure_crypto_isakmp_profile
- cat9kv
Added API get_boot_variables and get_config_register
- ISA
API to clear crypto isakmp
- Added configure_ipv6_prefix_list_with_permit_deny
API to Configures ipv6 prefix list on Device
- Added unconfigure_ipv6_prefix_list_with_permit_deny
API to unconfigures ipv6 prefix list on Device
Added config API configure_crypto_pki_http_max_buffer_size
Added config API unconfigure_crypto_pki_http_max_buffer_size
- Added configure_ip_nat_switchover_http and unconfigure_ip_nat_switchover_http
API to configure_ip_nat_switchover_http and unconfigure_ip_nat_switchover_http
Added config API configure_crypto_pki_crl_request
Added config API unconfigure_crypto_pki_crl_request
Added execute API clear_crypto_pki
- Added new API to configure ipv4 access list on line vty
API to configure ipv4 access list on line vty
- Added new API to unconfigure ipv4 access list on line vty
API to unconfigure ipv4 access list on line vty
- Added new API to configure ipv6 access list on line vty
API to configure ipv6 access list on line vty
- Added new API to unconfigure ipv6 access list on line vty
API to unconfigure ipv6 access list on line vty
- Added API to configure facility alarm temperature primary
Added support for configuring the primary temperature threshold for facility alarms.
The API allows setting the temperature threshold to ‘high’ and specifying the value.
- Added API to unconfigure facility alarm temperature primary
Added support for unconfiguring the primary temperature threshold for facility alarms.
The API allows removing the temperature threshold configuration.
Added support for configuring and unconfiguring notifications for primary temperature alarms.
Added support for configuring and unconfiguring relay settings for primary temperature alarms.
Added support for configuring and unconfiguring syslog settings for primary temperature alarms.
Added API to configure facility alarm temperature secondary
- Added API to unconfigure facility alarm temperature secondary
Added support for unconfiguring the secondary temperature threshold for facility alarms.
The API allows removing the temperature threshold configuration.
Added support for configuring and unconfiguring notifications for secondary temperature alarms.
Added support for configuring and unconfiguring relay settings for secondary temperature alarms.
Added support for configuring and unconfiguring syslog settings for secondary temperature alarms.
Added API to configure logging alarm
Added API to unconfigure logging alarm
api to configure extended access-list with dscp configure.
- iosxe/health/health_core
Update the api to collect core files for stack devices.
Fix
- iosxe
- Modified configure_route_map_permit to add few arguments
Added global_nhop for default recursive global next hop
Added default_recursive for default recursive next hop
Added default_nhop_ip for default recursive next hop address
- Modified unconfigure_route_map_permit to add few arguments
Added vrf for default recursive vrf next hop
Added global_nhop for default recursive global next hop
Added default_recursive for default recursive next hop
Added default_nhop_ip for default recursive next hop address
Updated password_recovery API, added init_connection to initialize connection
- Removed
unconfigure_crypto_pki_server
- iosxe/platform/get
Refactored get_platform_model_number to reliably return chassis PID as a string.
Added fallback logic to gather PIDs from inventory slots if chassis PID is missing.
Normalized show version parsing to ensure consistent comparison with inventory PIDs.
- iosxe/rommon/utils
Updated device_rommon_boot api to use correct tftp boot command.
- Updated device_rommon_boot api
Reordered the execution of execute_rommon_reset, execute_set_config_register
- iosxe/platform
Updated logic to handle standby scenario.
- iosxe/asr1k
Updated logic to handle standby scenario.
- sdk/utils
- Modified password_recovery api
Moved init_connection to step 5 to handle the syslogs.
- iosxe/sdk-pkg
Added an api get_recovery_details to get recovery details.
Updated the device_rommon_boot to use the api to get details.
- nxos
- Modified
Added flag to handle ‘minimally-disruptive’ mode for ISSU trigger in NXOS
Add
- iosxe/routing/configure
Added configure_ip_route_cache_on_interface API
- iosxe/platform
added ‘show platform hardware qfp active feature alg statistics sip clear’ api.
Fix/Add
- iosxe
- Modified configure_flow_record_match_datalink
Added nested if statement to account for ‘match datalink {field_type} vlan {direction}’ command.
- Modified configure_fnf_flow_record_match_flow
Added else clause to if statement block for ‘match flow {flow_name}’ command.
- Added configure_flow_record_transport API
Added new API to configure flow record transport fields match/collect source-port/destination-port/tcp flags.
genie.libs.parser
New
- iosxe
- Added acm merge parser
Added Acm merge
Added Acm replcae]
Added Acm rollback
- Added ShowPlatformMrpMappings
Added schema and parser for ‘show platform mrp mappings’ command.
- Added Parser for parsers for below commands
Added show mrp ring <ring-id>statistics all
- Added Parser for parsers for below commands
show platform software fed switch {switch_num} wdavc flows
show platform software fed switch {switch_num} wdavc function wdavc_ft_show_all_flows_seg_ui
- Added ShowPlatformHardwareFedActiveQosQueueConfigInternalPortTypeRecyclePortPortNumAllAsic parser
Added schema and parser for ‘show platform hardware fed {state} qos queue config internal port_type recycle-port port_num all asic {asic_number}’’
- Added below parser for c9550 by inheriting from c9350
ShowPlatformTcamUtilization
ShowPlatformHardwareFedSwitchQosQueueStatsInterfaceClear
ShowPlatformSoftwareFedActiveAclInfoDbDetail
ShowPlatformHardwareFedQosSchedulerSdkInterface
- Added Parser for below command
show tcp brief numeric
- Modified ShowInventory
Added logic support if name is a digit
- Added ShowSubsysNameIpfib
show subsys name ipfib
- Added ShowIpv6VirtualReassemblyFeatures parser
Added schema and parser for ‘show ipv6 virtual-reassembly features’
- Added ShowPlatformStatus schema in iosxe/ie3k
Added parser for show platform status in iosxe/ie3k
- Added ShowFlowMonitorCacheSortOrderSuperParser
show flow monitor {name} cache sort counter bytes layer2 long top {value} format table
show flow monitor {name} cache sort counter bytes long top {value} format table
show flow monitor {name} cache sort counter packets long top {value} format table
show flow monitor {name} cache sort flow direction top {value} format table
show flow monitor {name} cache sort timestamp absolute {time} top {value} format table
show flow monitor {name} cache sort datalink dot1q priority top {value} format table
show flow monitor {name} cache sort datalink dot1q vlan {direction} top {value} format table
show flow monitor {name} cache sort datalink ethertype top {value} format table
show flow monitor {name} cache sort datalink mac {destination} address {direction} top {value} format table
show flow monitor {name} cache sort datalink vlan {direction} top {value} format table
show flow monitor {name} cache sort ipv4 {destination} address top {value} format table
show flow monitor {name} cache sort ipv4 protocol top {value} format table
show flow monitor {name} cache sort ipv4 tos top {value} format table
show flow monitor {name} cache sort ipv4 ttl top {value} format table
show flow monitor {name} cache sort ipv4 version top {value} format table
show flow monitor {name} cache sort ipv6 {destination} address top {value} format table
show flow monitor {name} cache sort ipv6 protocol top {value} format table
show flow monitor {name} cache sort ipv6 hop-limit top {value} format table
show flow monitor {name} cache sort ipv6 traffic-class top {value} format table
show flow monitor {name} cache sort ipv6 version top {value} format table
show flow monitor {name} cache sort transport tcp flags top {value} format table
show flow monitor {name} cache sort transport {port} top {value} format table
show flow monitor {name} cache sort {order} counter bytes layer2 long top {value} format table
show flow monitor {name} cache sort {order} counter bytes long top {value} format table
show flow monitor {name} cache sort {order} counter packets long top {value} format table
show flow monitor {name} cache sort {order} flow direction top {value} format table
show flow monitor {name} cache sort {order} timestamp absolute {time} top {value} format table
show flow monitor {name} cache sort {order} datalink dot1q priority top {value} format table
show flow monitor {name} cache sort {order} datalink dot1q vlan {direction} top {value} format table
show flow monitor {name} cache sort {order} datalink ethertype top {value} format table
show flow monitor {name} cache sort {order} datalink mac {destination} address {direction} top {value} format table
show flow monitor {name} cache sort {order} datalink vlan {direction} top {value} format table
show flow monitor {name} cache sort {order} ipv4 {destination} address top {value} format table
show flow monitor {name} cache sort {order} ipv4 protocol top {value} format table
show flow monitor {name} cache sort {order} ipv4 tos top {value} format table
show flow monitor {name} cache sort {order} ipv4 ttl top {value} format table
show flow monitor {name} cache sort {order} ipv4 version top {value} format table
show flow monitor {name} cache sort {order} ipv6 {destination} address top {value} format table
show flow monitor {name} cache sort {order} ipv6 protocol top {value} format table
show flow monitor {name} cache sort {order} ipv6 hop-limit top {value} format table
show flow monitor {name} cache sort {order} ipv6 traffic-class top {value} format table
show flow monitor {name} cache sort {order} ipv6 version top {value} format table
show flow monitor {name} cache sort {order} transport tcp flags top {value} format table
show flow monitor {name} cache sort {order} transport {port} top {value} format table
- Added ShowFlowMonitorCacheSortOrderCounter
show flow monitor {name} cache sort {order} counter bytes layer2 long top {value} format table
show flow monitor {name} cache sort {order} counter bytes long top {value} format table
show flow monitor {name} cache sort {order} counter packets long top {value} format table
show flow monitor {name} cache sort counter bytes long top {value} format table
show flow monitor {name} cache sort counter bytes layer2 long top {value} format table
show flow monitor {name} cache sort counter packets long top {value} format table
- Added ShowFlowMonitorCacheSortOrderFlow
show flow monitor {name} cache sort {order} flow direction top {value} format table
show flow monitor {name} cache sort flow direction top {value} format table
- Added ShowFlowMonitorCacheSortOrderTimestamp
show flow monitor {name} cache sort {order} timestamp absolute {time} top {value} format table
show flow monitor {name} cache sort timestamp absolute {time} top {value} format table
- Added ShowFlowMonitorCacheSortOrderTransport
show flow monitor {name} cache sort {order} transport tcp flags top {value} format table
show flow monitor {name} cache sort {order} transport {port} top {value} format table
show flow monitor {name} cache sort transport tcp flags top {value} format table
show flow monitor {name} cache sort transport {port} top {value} format table
- Added ShowFlowMonitorCacheSortOrderDatalink
show flow monitor {name} cache sort {order} datalink dot1q priority top {value} format table
show flow monitor {name} cache sort {order} datalink dot1q vlan {direction} top {value} format table
show flow monitor {name} cache sort {order} datalink ethertype top {value} format table
show flow monitor {name} cache sort {order} datalink mac {destination} address {direction} top {value} format table
show flow monitor {name} cache sort {order} datalink vlan {direction} top {value} format table
show flow monitor {name} cache sort datalink dot1q priority top {value} format table
show flow monitor {name} cache sort datalink dot1q vlan {direction} top {value} format table
show flow monitor {name} cache sort datalink ethertype top {value} format table
show flow monitor {name} cache sort datalink mac {destination} address {direction} top {value} format table
show flow monitor {name} cache sort datalink vlan {direction} top {value} format table
- Added ShowFlowMonitorCacheSortOrderIPv4
show flow monitor {name} cache sort {order} ipv4 {destination} address top {value} format table
show flow monitor {name} cache sort {order} ipv4 protocol top {value} format table
show flow monitor {name} cache sort {order} ipv4 tos top {value} format table
show flow monitor {name} cache sort {order} ipv4 ttl top {value} format table
show flow monitor {name} cache sort {order} ipv4 version top {value} format table
show flow monitor {name} cache sort ipv4 {destination} address top {value} format table
show flow monitor {name} cache sort ipv4 protocol top {value} format table
show flow monitor {name} cache sort ipv4 tos top {value} format table
show flow monitor {name} cache sort ipv4 ttl top {value} format table
show flow monitor {name} cache sort ipv4 version top {value} format table
- Added ShowFlowMonitorCacheSortOrderIPv6
show flow monitor {name} cache sort {order} ipv6 {destination} address top {value} format table
show flow monitor {name} cache sort {order} ipv6 protocol top {value} format table
show flow monitor {name} cache sort {order} ipv6 hop-limit top {value} format table
show flow monitor {name} cache sort {order} ipv6 traffic-class top {value} format table
show flow monitor {name} cache sort {order} ipv6 version top {value} format table
show flow monitor {name} cache sort ipv6 {destination} address top {value} format table
show flow monitor {name} cache sort ipv6 protocol top {value} format table
show flow monitor {name} cache sort ipv6 hop-limit top {value} format table
show flow monitor {name} cache sort ipv6 traffic-class top {value} format table
show flow monitor {name} cache sort ipv6 version top {value} format table
- Added Parser for parsers for below commands
‘show flow monitor {monitor_name} cache sort application name top {top_count}’,
‘show flow monitor {monitor_name} cache sort connection {connetion_type} counter bytes network long top {top_count}’
- Added
Added schema and parser for show ip ospf neighbor summary
Added schema and parser for show ipv6 ospf neighbor summary
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightAclTableStatistics parser
Added schema and parser for cli “show platform hardware fed {state} fwd-asic insight acl-table statistics”
- Modified ShowPlatformSoftwareFedSwitchActiveAclInfoSdkDetail parser
Added optional keys in schema and p15 regex for “show platform software fed {state} switch active acl info sdk detail”
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightSanetAccsecClientTable parser.
Added parser for cli ‘show platform hardware fed switch {switch} fwd-asic insight sanet_accsec_client_table()’.
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightAccsecClientClassificationEnablement parser.
Added parser for cli ‘show platform hardware fed switch {switch_id} fwd-asic insight accsec_client_classification_enablement()’.
- Added Parser for show platform hardware fed {mode} qos queue stats internal port_type recycle-port port_num {port_num} asic {asic}
Added a new schema and parser for the show platform hardware fed {mode} qos queue stats internal port_type recycle-port port_num {port_num} asic {asic} command.
- Added ShowPlatformHardwareFedSwitchFwdAsicInsightL2SwitchAttachmentCircuit parser.
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight l2_attachment_circuit_status({sys_port_gid}).
Added parser for cli show platform hardware fed switch {switch_id} fwd-asic insight l2_switch_attachment_circuits({l2_ac_gid}).
- Modified ShowPlatformSoftwareObjectManagerFpActiveStatistics
Added new cli in parser for show platform software object manager
- Modified ShowClock
Added new time format parser for show clock
- ShowConnection
show connection name 1.
- ShowControllerT1
show controller T1
- Modified ShowIpNatBpa
show ip nat bpa
- Modified ShowIpOspfDatabaseNssa
show ip ospf database nssa.
- Added ShowPlatformSoftwareFirewallRPActiveZones
sh ipv6 mfib FF03111 count
sh ipv6 mfib FF03111 1011200 count
Added ShowIsdnStatusSerial parser in show_isdn.py
Added schema and parser for cli ‘show isdn status serial {interface}’
Added ShowMonitorEventTraceCryptoIkev2EventAll parser in show_monitor.py
Added schema and parser for cli ‘show monitor event-trace crypto ikev2 event all’
- Added ShowPlatformHardwareQfpActiveFeatureFirewallDatapathScbDetail
show platform hardware qfp active feature firewall datapath scb any any any any any all any detail
Added ShowPlatformHardwareQfpActiveFeatureNatDatapathEdm
‘show platform hardware qfp active feature nat datapath edm’
- Added ShowPlatformHardwareQfpActiveFeatureNatDatapathPor parser in show_platform.py
Added schema and parser for cli ‘Schema for show platform hardware qfp active feature nat datapath port’
- Added howPlatformHardwareQfpActiveFeatureNatDatapathMap parser in show_platform.py
Added schema and parser for cli ‘Parser for show platform hardware qfp active feature nat datapath map’
- Added ShowPlatformSoftwareFirewallRPActiveZones
show platform software firewall RP active zones
show platform software firewall FP active zones
Added ShowPlatformSoftwareWccpWebCacheCounters parser in show_platform.py
Added schema and parser for cli ‘show platform software wccp web-cache counters’
- ShowPolicyMapTypeInspectPmap
show policy-map type inspect pmap
- Added class ShowSubsysName parser in show_subsys.py
Added schema and parser for cli ‘show subsys name {name}’
- Added ShowSubsysNamePgen parser in show_subsys.py
Added schema and parser for cli ‘show subsys name pgen’
- Modified ShowVpdnTunnelPptpAll
show vpdn tunnel pptp all
- Added class ShowXdrLinecard parser in show_platform.py
Added schema and parser for cli ‘show xdr linecard’
- Added class ShowZonePairSecurity parser in show_paltform.py
Added schema and parser for cli ‘show zone-pair security’
- nxos
- Added ShowInterfaceCountersTable
Added schema and parser for ‘show interface counters table’ command.
Modified
- iosxe
- Modified ShowMrpPorts
Updated regex pattern in ShowMrpPorts.
- Modified show flow monitor {name} cache parser
added one more type of output with connection_initiator, connection_server_nw_bytes_counter, connection_client_nw_bytes_counter parameter
- Updated ShowMerakiConnect parser
Added support for “VRF” field in meraki_tunnel_interface section
- nxos
- Modified ShowInterface
Updated regex pattern in ShowInterface.
Updated regex pattern in ShowCdpNeighbors and ShowCdpNeighborsDetail.
Fix
- nxos
- Show Intrface parser
Added regex to match port channel.
- Modified Show ip mroute vrf all and show ipv6 mroute vrf all
Added <router_id> option.
- iosxe
- Modified ShowFlowMonitor parser
- Modified parser for CLI
‘show flow monitor {name} cache format table’
Modified regex pattern P1 for the given ie3k output
Added few fields to ‘show env temperature’ command output to support ‘Inlet Temp Sensor’ and ‘HotSpot Temp Sensor’ temperature readings.
Fixed parsing of temperature thresholds to handle spaces and units correctly.
Updated regex patterns to ensure accurate matching of temperature readings and thresholds.
- Modified ShowLispInstanceIdServiceStatistics
Made itr_map_resolvers and etr_map_servers optional in schema.
Modified ShowPlatformPacketTracePacket
‘show platform packet-trace packet all’
- Modified ShowBgpSummarySuperParser
Supported more variant output
- Modified Dir
Added p2_2 regex to support dir drec0 command for c9200 devices.
- viptela/show_control
- Updated ShowControlLocalPropertiesSchema
Made the port_hopped key optional to accommodate various outputs
- iosxr
- Modified ShowControllersOpticsDb
Fix Parser for ‘show controllers optics *’ to extract multi-word Vendor Name
- parser
- Modified Show Processes Memory Doc Value ()
Updated doc value for “show processes memory” to match this, instead of “show switch detail”