December 2025

December 30 - Genie v25.11

New Module Versions

Modules

Version

genie

v25.11

genie.libs.health

v25.11

genie.libs.clean

v25.11

genie.libs.conf

v25.11

genie.libs.filetransferutils

v25.11

genie.libs.ops

v25.11

genie.libs.parser

v25.11

genie.libs.robot

v25.11

genie.libs.sdk

v25.11

genie.telemetry

v25.11

genie.trafficgen

v25.11

Changelogs

genie

genie.libs.clean

Fix
  • clean-pkg

    • Added support to block copy operations if the target file size does not match.

  • rommonboot stage
    • iosxe

      • Removed duplicate task function.

    • cat9k

      • Removed device.destroy() call and added device.sendline() in the rommon boot stage so that the device reaches the rommon prompt.

  • clean-pkg/stages

    • Added the reset of the rollup flag when recovery is enabled

    • Updated the api configure_management to able to skip for missing attribute instead of failing complete stages.

  • iosxe
    • clean-pkg/utils

      • Fixed issue with updating protected file for image

New
  • clean/recover

    • Added power cycle retry mechanism to enhance reliability during device recovery.

    • Updated the console speed configuration in case of failiure connection to device

genie.libs.conf

genie.libs.filetransferutils

New
  • fileserver/protocols/scp.py

    • Added dynamic SCP fileserver protocol support for file transfer operations.

Add
  • iosxe

    • Added HTTPS support for FileTransfer

  • iosxr

    • Added HTTPS support for FileTransfer

  • nxos

    • Added HTTPS support for FileTransfer

genie.libs.health

genie.libs.ops

genie.libs.robot

genie.libs.sdk

Add
  • iosxe/install

    • Added dialog from failed senario in install one shot

    • Added dialog from failed senario in install one shot

  • iosxe/cat9k/c9400

    • Added dialog from failed senario in install one shot

  • utils

    • Added get_server_certificate_pem API

  • iosxe
    • dns
      • configure_ip_host

        • Added VRF support

      • unconfigure_ip_host

        • Added VRF support

  • iosxr
    • dns

      • added configure_ip_host

      • added unconfigure_ip_host

    • pki

      • added configure_trustpoint

      • added unconfigure_trustpoint

      • added configure_pki_authenticate_certificate

  • nxos
    • dns

      • added configure_ip_host

      • added unconfigure_ip_host

    • pki

      • added configure_trustpoint

      • added unconfigure_trustpoint

      • added configure_pki_authenticate_certificate

New
  • iosxe
    • Added configure_bgp_tcpao API

      • API to configure BGP TCP Authentication Option for bgp neighbor

    • Added unconfigure_bgp_tcpao API

      • API to remove BGP TCP Authentication Option for bgp neighbor

    • Added configure_tcp_keychain API

      • API to configure TCP-AO keychain on device

    • Added remove_tcp_keychain API

      • API to remove TCP-AO keychain from device

    • Added configure_bgp_md5 API

      • API to configure BGP MD5 authentication on BGP router

    • Added unconfigure_bgp_md5 API

      • API to unconfigure BGP MD5 authentication on BGP router

    • PKI

      • configure_pki_export_advanced

      • configure_pki_import_advanced

      • change_pki_certificate_hash

    • sdk-pkg
      • Updated configure_management_gnmi api

        • Made default value of ‘secure_server’ parameter as True.

    • Added configure_bgp_ipv6_dampening

      • New API to configure bgp dampening parameters for IPV6 address family

    • PKI

      • execute_return_crypto_pki_server

    • Added unconfigure_ip_ssh_client_algorithm_kex API support for the CLI command

      • New API support for ‘unconfigure ip ssh client algorithm kex’ CLI command to unconfigure key exchange algorithms for SSH client on IOSXE devices.

    • Added unconfigure_ip_ssh_server_algorithm_kex API support for the CLI command

      • New API support for ‘unconfigure ip ssh server algorithm kex’ CLI command to unconfigure key exchange algorithms for SSH server on IOSXE devices.

    • sdk-pkg

      • Updated configure_management_credentials and unconfigure_management_credentials APIs to use secret password instead of plain text password.

      • Updated configure_management_ssh to set modulus size to 4096 bits while generating RSA keys.

    • Added ‘execute_test_platform’ to iosxe test_platform-execute.py file.

      • New API support for ‘test platform’ cli.

    • Added API to execute test led cli command

    • Added suport for verify ping api to support new parameters

    • Added execute_test_platform_hardware_sensor_value_cm

      • API to execute_test_platform_hardware_sensor_value_cm

    • Added API get_alarm_contact_relay_mode to retrieve the alarm contact relay mode configuration.

    • Added API get_interfaces_connect_status to retrieve interfaces with connect/not connect status.

    • configure_aaa_group_radius_interface

      • Added support for IPv6 address configuration

      • Added ‘protocol’ parameter to specify protocol type (default is ‘ip’)

      • Added ‘forwarding’ parameter to enable/disable vrf forwarding

    • unconfigure_aaa_group_radius_interface

      • Added support for IPv6 address unconfiguration

      • Added ‘protocol’ parameter to specify protocol type (default is ‘ip’)

      • Added ‘forwarding’ parameter to enable/disable vrf forwarding

  • sdk-pkg

    • update ruamel.yaml.clib to avoid break from 0.2.15 release

  • apis/utils.py

    • Default to SCP for file copy operations using the copy_from_device and copy_to_device APIs

  • nxos/utils

    • Device Boot Recovery

Fix
  • iosxe
    • Updated api configure_key_config_key_password_encrypt

      • updated api with new dialog pattern

    • Updated api unconfigure_key_config_key_password_encrypt

      • updated api with new dialog pattern

    • Install

      • Added statement in execute_install_one_shot.

      • Added install_timeout to execute_install_activate.

    • cat9k/c9500x

      • Added __init__ file.

    • Modified perform_telnet API

      • Added support to execute command on remote_device before exit the telnet.

    • Added new parameter in API configure_crypto_ikev2_proposal

    • configure_radius_interface_vrf Added support for IPv6 address configuration

      • Added ‘protocol’ parameter to specify protocol type (default is ‘ip’)

    • unconfigure_radius_interface_vrf Added support for IPv6 address unconfiguration

      • Added ‘protocol’ parameter to specify protocol type (default is ‘ip’)

    • configure_radius_group Added support for IPv6 address configuration

      • Added ‘ipv6_addr’ in server_config to configure IPv6 address for RADIUS server

genie.libs.parser

Fix
  • iosxe
    • Modified ShowBgpNeighbors

      • Updated parser and schema for Showbgp neighbour to support tcp aco keychain

    • Modified ShowInterfaces

      • ‘show interfaces <interface>’

    • Modified ShowIpVirtualReassemblyInterface

      • ‘show ip virtual-reassembly {interface}’

    • Modified ShowCryptoPkiTimerDetail parser

    • Modified ShowPlatformSoftwareInfrastructureThreadFastpath

      • show platform software infrastructure thread fastpath.

    • Modified ShowControllerVDSL

      • ‘show controller VDSL {interface}’

    • Modified ShowParameterMapInspectGlobalScema

    • Added Optional keyword for log_flow_export_template_timeout_rate variable to support new cli output

    • Modified ShowKeyChain

      • updated parser and schema for ShowKeyChain parser to support TCP key chain and MACsec Key Table (MKT) features.

    • Modified ShowPlatformHardwareQfpActiveFeatureFirewallDrop

      • ‘show platform hardware qfp active feature firewall drop {actions}’

    • Modified ShowRedundancyApplicationGroup

      • Fixed UnboundLocalError by initializing media_active_peer dictionary before use.

      • Added Optional “local” key to active_peer schema.

      • Changed authentication, authentication_failures, reload_peer, resign keys in stats to Optional.

      • Changed all keys in active_peer (pkts, bytes, ha_seq, seq_number, pkt_loss, status, hold_timer) to Optional.

      • Added regex pattern p47 to accommodate “Standby Peer” output lines.

    • Fixed parser ShowPlatformSoftwareFedSwitchActiveIpv6Route

      • Updated handle additional lines in the show platform software fed switch active ipv6 route command.

    • Fixed parser ShowPlatformSoftwareFedActiveIpRoute

      • Updated handle additional lines in the show platform software fed active ip route command.

    • Fixed parser ShowCtsServerList

      • Updated to handle radius server group configuration with IPv6 interface.

    • Fixed parser ShowIpSlaStatistics

      • Updated handle additional lines in the show ip sla statistics {probe_id} command.

  • nxos
    • Modified ShowIsis, ShowIsisAdjacency, ShowIsisHostname, ShowIsisHostnameDetail, ShowIsisInterface

      • Adjust area address regex to account for addresses that are hex or None

      • Adjust schemas to account for valid VRF configurations that do not have all information

    • Modified ShowBgpVrfAllAllSummary

      • Handle cases where BGP neighbor information is spread over 3 lines

New
  • iosxe
    • Added ShowPlatformSoftwareFedSwitchActiveStpVlan parser

      • show platform software fed switch {switch_num} stp-vlan {vlan_id}

      • show platform software fed active stp-vlan {vlan_id}

    • Added Parser for show ipv6 traffic

      • Added a new schema and parser for the show ipv6 traffic command.

    • Enhanced ShowCtsSxpConnectionsBrief parser.

      • Enhanced parser for cli show cts sxp connections brief.

    • Added ShowCtsSxpSgtMap parser.

      • Added parser for cli show cts sxp sgt-map.

    • Added ShowPlatformHardwareQfpActiveInfrastructurePuntStatisticsTypePerCauseClear

      • ‘show platform hardware qfp active infrastructure punt statistics type per-cause clear’

    • Added Parser for show platform software firewall qfp active runtime

      • Added a new schema and parser for the show platform software firewall qfp active runtime command.

    • Added ShowIpv6MfibActive parser in show_mfib.py

      • Added schema and parser for cli ‘show ipv6 mfib active’

    • Modified ShowHwModuleSubslotAttribute

      • ‘show hw-module subslot {slot} attribute’

    • Added ShowPolicyFirewallStatsGlobal

      • ‘show policy-firewall stats global’

    • Added ShowLocateSwitch

      • Added show locate switch parser and tests for IOSXE IE3K platform

    • Added ShowPlatformHardwareQfpActiveFeatureFirewallUcodeScbDetail

      • ‘show platform hardware qfp {instance} feature firewall ucode scb a a a a a a a detail’

    • Added showidprom

      • Added parser for “show idprom supervisor eeprom detail”

    • Added ShowDiagSubslotEeprom

    • ‘show diag subslot 1/0 eeprom’

    • Added ShowHardwareLed

      • Added show hardware led parser and tests for C9610R platform, revision 1

  • nxos
    • Added ShowSystemInternalFlash

      • show system internal flash

    • Modified ShowIpMrouteSummary

      • Updated regex pattern p8 to capture bitrate_unit with optional k/m/g/t prefixes.

      • Added conversion logic to normalize bitrate values to bps format.

    • Modified ShowIpv6MrouteSummary

      • Updated regex pattern p8 to capture bitrate_unit with optional k/m/g/t prefixes.

      • Added conversion logic to normalize bitrate values to bps format.

Added
  • iosxe
    • Added ShowPlatformHardwareChassisPowerSupplyDetailAll in iosxe/Cat9k/c9550

      • Added parser for show platform hardware chassis power supply detail all

    • Added ShowPlatformHardwareChassisFantrayDetail in iosxe/Cat9k/c9550

      • Added parser for show platform hardware chassis fantray detail

Add
  • iosxe

    • Added new parameters show cloud-mgmt connect

    • Added new parameters show uac uplink, show uac Active-vlan, show uac Active-port

Modified
  • iosxe
    • Modified ShowCefInterfacePolicyStatistics parser in show_cef.py

      • Modified ShowCefInterfacePolicyStatistics for cli ‘show cef interface {interface_name} policy-statistics {direction}’

genie.telemetry