July 2026

July 28 - Genie v26.7

New Module Versions
Modules	Version
`genie`	v26.7
`genie.lamp`	v26.7
`genie.libs.health`	v26.7
`genie.libs.clean`	v26.7
`genie.libs.conf`	v26.7
`genie.libs.filetransferutils`	v26.7
`genie.libs.ops`	v26.7
`genie.libs.parser`	v26.7
`genie.libs.robot`	v26.7
`genie.libs.sdk`	v26.7
`genie.telemetry`	v26.7
`genie.trafficgen`	v26.7

Changelogs

genie

Fix

genie.abstract.decorator
- Modified deprecated
  
  Include the deprecated API path in warning messages so callers can identify which deprecated API needs to be updated.

genie.libs.clean

Fix

clean/stages
- Modified ConfigureManagement stage
  
  Added PING_ATTEMPTS = 3
clean
- Modified Connect recovery result handling
  
  Report the Connect stage as PASSX when device recovery succeeds and pyATS Clean continues.
- Modified recovery_processor
  
  Preserve the triggering clean stage result when device recovery reports its own result.
  
  Keep recovery results visible without rolling them up into the clean stage result.
  
  Record clean termination as an explicit clean-flow result when non-Connect recovery succeeds.
- Modified recovery_processor
  
  Report successful device recovery as PASSED instead of FAILED when clean is terminated.
- Modified DeleteFiles clean stage
  
  Increased default delete timeout from 500 to 3600 seconds.
  
  Added timeout to stage schema.
ioxe/stages
- Added a new pattern to detect device reload
iosxe
- InstallImage
  
  Continued reload handling when install add activate commit reports SUCCESS before the execute service times out during auto-reload.
  
  Made install log collection best-effort when image installation fails so diagnostic collection errors do not mask the original install failure.
- Modified break boot recovery
  
  Update Unicon current_state when the break-boot dialog matches a state prompt such as rommon.
- Updated InstallImage clean stage
  
  Detect C9350 quick reload messages that include “reload fru action requested”, “Reload Command”, or “Reload Firmware Command”.
  
  Added unittest coverage for C9350 quick reload dialog matching.
- Modified the InstallImage stage to use create_empty_file API
- Updated InstallImage clean stage
  
  Continue reload handling when the install dialog detects a success marker even if execute returns empty output.
  
  Fail the install step when execute returns empty output without a success marker.
- Updated InstallImage clean stage
  
  Updated required space conversion from KB to bytes before calling free_up_disk_space
- Modified Reload clean stage
  
  Preserved reload service arguments when retrying reload with manual boot command.
- Modified Reload clean stage
  
  Honor grub_boot_image during the manual boot fallback so GRUB based platforms (e.g. cat9kv) boot the requested menu entry instead of sending an invalid ‘boot <image>’ command at the bootloader prompt
- Modified the SD-WAN Connect clean stage
  
  Accepted logout: false while preserving the connection for later clean stages.
  
  Rejected logout: true because SD-WAN clean requires the connection to remain active.

genie.libs.sdk

New

iosxe
- Added C9200 collect_install_log API using the Cat9k switch-active install-manager command syntax.
- Added debug_access_session_all
  
  API to enable or disable ‘debug access-session all’
- Added debug_dot1x_all
  
  API to enable or disable ‘debug dot1x all’
- Added debug_mab_all
  
  API to enable or disable ‘debug mab all’
- Added debug_aaa_authentication
  
  API to enable or disable ‘debug aaa authentication’
- Added debug_aaa_authorization
  
  API to enable or disable ‘debug aaa authorization’
- Added debug_epm_all
  
  API to enable or disable ‘debug epm all’
- Added debug_radius_authentication
  
  API to enable or disable ‘debug radius authentication’
- Added get_show_access_session_mac_detail
  
  API to get ‘show access-session mac {mac} details’ output
- Added get_show_access_session_interface_detail
  
  API to get ‘show access-session interface {interface} details’ output
- Added get_access_session_interface_mac_detail
  
  API to get access-session interface detail for a specific mac address
- Added get_access_sessions_interface_count
  
  API to get the access sessions count on an interface
- Added IOSXE SDK API support for
  
  configure_aaa_group_server_radius
- Added unit test coverage for the new API and non-standard option.
- Added verify_access_session_detail
  
  API to verify access session client details on an interface
- Added verify_access_session_timeout_remaining
  
  API to verify the access session timeout remaining time is within an expected range
- Added verify_access_session_removed
  
  API to verify the access session for a mac on an interface is removed
- Added IOSXE SDK API support for
  
  configure_class_map_type_control
  
  unconfigure_class_map_type_control
- Added unit test coverage for the new APIs.
- Added cloud_mgmt verify APIs for Meraki/cloud management (show cloud-mgmt)
  
  verify_cloud_id
  
  verify_current_mode
  
  verify_conversion_status
  
  verify_cloud_mgmt_migration_status
- Added configure_enable_debugs
  
  service timestamps
  
  logging queue-limit
  
  logging rate-limit
  
  logging buffered
- Added unconfigure_enable_debugs
  
  no service timestamps
  
  logging queue-limit
  
  logging rate-limit
  
  no logging buffered
- Added unit test coverage for the new APIs.
- Added
  
  configure_interface_ip_address_no_shutdown API
- Added configure_mpls_bgp_forwarding
  
  added api to execute ‘mpls bgp forwarding’ on the device
- Added unconfigure_mpls_bgp_forwarding
  
  added api to execute ‘no mpls bgp forwarding’ on the device
- Added execute_erase_nvram
  
  added api to execute ‘erase nvram:’ on the device
- Added execute_erase_nvram_all
  
  added api to execute ‘erase /all nvram:’ on the device
- Added get_show_output
  
  API to execute a show command on the active or standby RP. Accepts an optional target kwarg and returns (bool(output), output).
- Added unit test coverage for the new API.
- Added get_hw_module_subslot_oir
  
  API to get the OIR status of a hardware module subslot
- Added get_platform_hardware_subslot_module_interface_status
  
  API to get the interface status of a hardware module subslot interface
- Added verify_show_hw_module_subslot_oir
  
  Verify OIR status in show hw-module subslot output for a given subslot
- Added verify_platform_hardware_subslot_module_interface_status_mac_learning
  
  Verify MAC learning status in show platform hardware subslot module interface status output
- Added configure_ip_igmp_snooping_robustness
  
  added api to configure ip igmp snooping robustness variable
- Added unconfigure_ip_igmp_snooping_robustness
  
  added api to unconfigure ip igmp snooping robustness variable
- Added configure_ip_igmp_snooping_check_rtr_alert_option
  
  added api to configure ip igmp snooping check rtr-alert-option
- Added unconfigure_ip_igmp_snooping_check_rtr_alert_option
  
  added api to unconfigure ip igmp snooping check rtr-alert-option
- Added configure_ip_igmp_snooping_check_ttl
  
  added api to configure ip igmp snooping check ttl
- Added unconfigure_ip_igmp_snooping_check_ttl
  
  added api to unconfigure ip igmp snooping check ttl
- Added configure_ip_igmp_snooping_last_member_query_count
  
  added api to configure ip igmp snooping last-member-query-count
- Added unconfigure_ip_igmp_snooping_last_member_query_count
  
  added api to unconfigure ip igmp snooping last-member-query-count
- Added configure_ip_igmp_snooping_last_member_query_interval
  
  added api to configure ip igmp snooping last-member-query-interval
- Added unconfigure_ip_igmp_snooping_last_member_query_interval
  
  added api to unconfigure ip igmp snooping last-member-query-interval
- Added configure_ip_igmp_snooping_querier_address
  
  added api to configure ip igmp snooping querier address
- Added unconfigure_ip_igmp_snooping_querier_address
  
  added api to unconfigure ip igmp snooping querier address
- Added configure_ip_igmp_snooping_querier_interval
  
  added api to configure ip igmp snooping querier query-interval
- Added unconfigure_ip_igmp_snooping_querier_interval
  
  added api to unconfigure ip igmp snooping querier query-interval
- Added configure_ip_igmp_snooping_querier_max_response_time
  
  added api to configure ip igmp snooping querier max-response-time
- Added unconfigure_ip_igmp_snooping_querier_max_response_time
  
  added api to unconfigure ip igmp snooping querier max-response-time
- Added configure_ip_igmp_snooping_querier_version
  
  added api to configure ip igmp snooping querier version
- Added unconfigure_ip_igmp_snooping_querier_version
  
  added api to unconfigure ip igmp snooping querier version
- Added configure_ip_igmp_snooping_immediate_leave
  
  added api to configure ip igmp snooping immediate-leave
- Added unconfigure_ip_igmp_snooping_immediate_leave
  
  added api to unconfigure ip igmp snooping immediate-leave
- Added get_igmp_snooping_group
  
  added api to retrieve an ip igmp snooping group entry by vlan and group
- Added get_igmp_snooping_groups_count
  
  added api to retrieve the ip igmp snooping groups count, optionally filtered by vlan
- Added get_igmp_vrf_snooping_groups
  
  added api to retrieve the ip igmp snooping groups of a vrf
- Added get_igmp_groups
  
  added api to retrieve ip igmp groups, optionally filtered by interface
- Added get_igmp_vrf_groups
  
  added api to retrieve ip igmp groups of a vrf
- Added get_igmp_snooping
  
  added api to retrieve ip igmp snooping information
- Added unit test coverage for the new IGMP snooping get APIs.
- Added verify_igmp_snooping_group
  
  added api to verify an ip igmp snooping group entry matches the expected type, version and port list
- Added verify_igmp_snooping_group_notexist
  
  added api to verify an ip igmp snooping group entry does not exist
- Added verify_igmp_snooping
  
  added api to verify ip igmp snooping global and per vlan parameters
- Added verify_igmp_vrf_snooping_group
  
  added api to verify an ip igmp snooping group entry of a vrf matches the expected type, version and port list
- Added verify_igmp_vrf_snooping_group_notexist
  
  added api to verify an ip igmp snooping group entry of a vrf does not exist
- Added verify_igmp_group
  
  added api to verify an ip igmp group entry matches the expected interface and last reporter
- Added verify_igmp_group_notexist
  
  added api to verify an ip igmp group entry does not exist
- Added verify_igmp_vrf_group
  
  added api to verify an ip igmp group entry of a vrf matches the expected interface and last reporter
- Added verify_igmp_vrf_group_notexist
  
  added api to verify an ip igmp group entry of a vrf does not exist
- Added verify_igmp_snooping_group_count
  
  added api to verify the ip igmp snooping group count is within the expected range
- Added unit test coverage for the new IGMP snooping verify APIs.
- Added get_show_interface_output
  
  API to get show interfaces <interface> command output as a parsed dictionary
- Added verify_interface_counters_increment
  
  API to verify the increment of an interface counter field against an expected min/max range after test traffic
- Added unit test coverage for get_show_interface_output and verify_interface_counters_increment
- Added IOSXE SDK API support for
  
  configure_ip_portbundle
  
  unconfigure_ip_portbundle
- Added unit test coverage for the new APIs.
- Added get_l2qos_max_queue_number
  
  added api to get the max queue number supported by the device for l2 qos
- Added get_show_wrr_queue_bandwidth
  
  added api to get parsed output of ‘show wrr-queue bandwidth’
- Added get_show_wrr_queue_cos_map
  
  added api to get parsed output of ‘show wrr-queue cos-map’
- Added unit test coverage for the new L2 QoS get APIs.
- Added verify_wrr_queue_enabled
  
  Verify l2 qos wrr queue enabled status
- Added verify_wrr_queue_bandwidth
  
  Verify l2 qos wrr queue bandwidth of a given queue id
- Added verify_wrr_queue_cos_map
  
  Verify l2 qos wrr queue cos map of a given cos value
- Added get_mac_address_table_aging_time
  
  added api to get the mac address-table aging-time of the device
- Added get_mac_address_table
  
  added api to get the mac address-table, optionally filtered by interface and/or vlan
- Added get_mac_address_table_count
  
  added api to get the mac address-table count, optionally filtered by vlan
- Added unit test coverage for the new MAC get APIs.
- Added verify_mac_address_table_aging_time
  
  Verify mac address table aging time
- Added verify_mac_address_table_entry
  
  Verify a mac address entry in mac address table
- Added verify_mac_address_table_entry_flush
  
  Verify a mac address entry is flushed from mac address table
- Added verify_mac_address_table_entry_learned
  
  Verify a mac address entry is learned in mac address table
- Added verify_mac_address_table_count
  
  Verify mac address table count against min and max thresholds
- Added configure_ipv6_mld_snooping_suppression
  
  added api to configure ipv6 mld snooping listener-message-suppression
- Added unconfigure_ipv6_mld_snooping_suppression
  
  added api to unconfigure ipv6 mld snooping listener-message-suppression
- Added get_mld_snooping_address_count
  
  added api to retrieve ipv6 mld snooping address count
- Added get_ipv6_mld_snooping_address_summary
  
  added api to retrieve ipv6 mld snooping groups by vlan and group
- Added get_mld_snooping
  
  added api to retrieve ipv6 mld snooping information, optionally filtered by vlan
- Added verify_mld_snooping
  
  added api to verify ipv6 mld snooping global and per vlan parameters
- Added verify_mld_snooping_address_count
  
  added api to verify the ipv6 mld snooping address count is within the expected range
- Added verify_ipv6_mld_snooping_address_summary
  
  added api to verify an ipv6 mld snooping group entry matches the expected type, version, port and source address
- Added unit test coverage for the new MLD snooping verify APIs.
- Added SDK API support for
  
  configure_class_map_type_traffic
  
  configure_policy_map_type_service
- Added unit test coverage for service policy-map and traffic class-map APIs.
- Added verify_span_session
  
  added api to verify a span session in ‘show monitor session <session_id>’ against expected values
- Added verify_span_session_running_config
  
  added api to verify a span session line exists (or not) in device running-config monitor section
- Added configure_local_span_and_verify_output
  
  added api to configure a local span session and verify the session validation result against an expected reason code
- Added verify_span_port_counters
  
  added api to verify span source/destination interface packet counters within a tolerance window
- Added configure_vpdn_group_l2tp_tunnel_retransmit_retries
  
  added api to configure l2tp tunnel retransmit retries under vpdn-group
- Added unconfigure_vpdn_group_l2tp_tunnel_retransmit_retries
  
  added api to unconfigure l2tp tunnel retransmit retries under vpdn-group
- Added SDK API support for VPDN clear commands
  
  clear vpdn tunnel pptp {remote_hostname} {local_hostname}
  
  clear vpdn counters
  
  clear vpdn counters tunnel {protocol} all
  
  clear vpdn counters tunnel {protocol} id {tunnel_id}
  
  clear vpdn counters tunnel {protocol} hostname {remote_hostname} {local_hostname}
  
  clear vpdn counters tunnel {protocol} ip {ip_filter} {ip_address}
  
  clear vpdn counters session username {username}
  
  clear vpdn counters session id {tunnel_id} {session_id}
  
  clear vpdn counters session interface virtual-access {virtual_access_interface}
- Added unit test coverage for the new helper APIs.
- Modified configure_trustpoint
  
  API to configure_trustpoint on Device
- Added unconfigure_cts_policy_server_optional_parameters
  
  API to unconfigure_cts_policy_server_optional_parameters on Device
- Added unconfigure_ipv6_flow_monitor_on_interface
  
  API to unconfigure ipv6 flow monitor on an interface
- API for enable_device_tracking_debug
- API for disable_device_tracking_debug
- API for execute_hw_module_beacon_slot_port_status
- Enhanced configure_macsec_key_chain
  
  Added optional parameters mka_policy_name, mka_cipher, and key_server_priority to configure MKA policy from within the keychain context. This supports ACE/Cat9K access platforms where ‘mka policy’ must be configured inside ‘key chain … macsec’ rather than at global config level.
- Modified
  
  Extended configure_vpdn_group to support request dialout, accept dialout, source-ip, vpn vrf, terminate-from hostname, and multihop hostname
  
  Extended configure_dialer_interface to support ip unnumbered, dialer remote-name, dialer string, dialer vpdn, dialer in-band, dialer aaa, and ppp authentication without callin
  
  Extended configure_subinterface_dot1q_encapsulation to support VRF, IPv4 address, and no shutdown
  
  Extended unconfigure_subinterface_dot1q_encapsulation to support full subinterface cleanup
- Added unconfigure_management_restconf and configure_management_restconf
  
  API to unconfigure and configure management via RESTCONF
- Added touch_file API for ir1k/ir1101 platform execute
  
  Creates an empty file using ‘copy null:’ command.
  
  Added unit test in test_api_touch_file.py.
- Added SDK API support for
  
  clear simulator radius request all
  
  clear simulator radius testcase all
  
  clear pppoe int
  
  clear subscriber session all
  
  clear subscriber session username
- Modified configure_virtual_template API to support
  
  no ppp authentication
  
  ppp pap sent-username
  
  ppp chap hostname
  
  ppp chap password [type]
  
  ip address negotiated
  
  peer default ip address pool local
  
  ppp chap splitnames
  
  ppp timeout ncp
  
  ppp timeout idle
  
  no logging event link-status
  
  no ip address
  
  ip vrf forwarding
- Modified unconfigure_virtual_template API to support removing
  
  ip address negotiated
  
  ip vrf forwarding
  
  peer default ip address pool local
  
  ppp chap hostname
  
  ppp chap password [type]
  
  ppp chap splitnames
  
  ppp timeout ncp
  
  ppp timeout idle
- Added unit test coverage for the new helper APIs and virtual-template PPP options.
ios
- Added IOS SDK API support for
  
  configure_aaa_new_model
  
  unconfigure_aaa_new_model
  
  configure_aaa_authentication_login
  
  unconfigure_aaa_authentication_login
  
  configure_aaa_authorization_exec
  
  unconfigure_aaa_authorization_exec
- Added unit test coverage for the new APIs.
- Added IOS SDK API support for
  
  configure_bba_group
  
  unconfigure_bba_group
- Added unit test coverage for the new APIs.
- Modified unconfigure_bba_group API to support
  
  vt_number to remove only the virtual-template from a bba-group
- Added unit test coverage for the modified API.
- Added IOS SDK API support for
  
  clear_ip_dhcp_binding
- Added unit test coverage for the new API.
- Added configure_ip_routing SDK API for ios platform
  
  Configures ip routing on the device to enable IPv4 routing.
- Added unit test coverage for the new API.
- Added IOS SDK API support for
  
  execute_test_pppoe
- Added unit test coverage for the above API.
- Added IOS SDK API support for
  
  configure_line_console
  
  configure_line_vty
- Added unit test coverage for the new APIs.
- Added IOS SDK API support for
  
  configure_pppoe_enable_interface
  
  unconfigure_pppoe_enable_interface
- Added unit test coverage for the new APIs.
- Added IOS SDK API support for
  
  remove_virtual_interface
  
  shut_interface
  
  unshut_interface
- Added unit test coverage for the above APIs.
- Added IOS SDK API support for
  
  configure_ripng
  
  unconfigure_ripng
  
  configure_interface_ripng
  
  unconfigure_interface_ripng
- Added unit test coverage for the new APIs.
- Added IOS SDK API support for
  
  execute_show_simulator_radius_server_all
- Added unit test coverage for the new API.
- Added configure_simulator_radius_account_coa
  
  simulator radius account-coa
- Added unconfigure_simulator_radius_account_coa
  
  no simulator radius account-coa
- Added unit test coverage for the new APIs.
- Added IOS SDK API support for
  
  configure_simulator_radius_client_host
  
  unconfigure_simulator_radius_client_host
- Modified configure_simulator_radius_subscriber API to support
  
  framed_protocol
- Added unit test coverage for the new and modified APIs.
- Added get_interface_ip_address SDK API for ios platform
  
  Parses show ip interface brief <interface> and returns the assigned IPv4 address, or None if unassigned/missing.

Fix

iosxe
- cat9k
  
  c9800
  
  Added GRUB defaults to send_break_boot for grub_activity_pattern and grub_breakboot_char to fix password recovery on C9800-CL (vWLC).
- Modified configure_any_radius_server API to support
  
  non-standard
- BLITZ
  
  Modified gnmi_util script
  
  preserved serialized JSON values for custom gNMI messages
  
  fixed repeated leaf-list values to build a single JSON list
- Fixed configure_clear_macsec_interface_statistics
  
  Changed from device.configure() to device.execute() since ‘clear macsec statistics interface …’ is an EXEC mode command, not a configuration mode command
  
  Updated unit test to assert device.execute is called
- Added configure_400g_mode_port_group_range
  
  Added closing paranthesis to the slot parameter to configure_400g_mode_port_group_range API
- Added unconfigure_400g_mode_port_group_range
  
  Added closing paranthesis to the slotparameter to unconfigure_400g_mode_port_group_range API
- Added configure_400g_mode_port_group_range
  
  Added timeout parameter to configure_400g_mode_port_group_range API
- Added unconfigure_400g_mode_port_group_range
  
  Added timeout parameter to unconfigure_400g_mode_port_group_range API
- management
  
  Added a longer timeout when configuring the Type 6 master key.
  
  Added unit test coverage for the master key configure timeout.
- Fixed configure_monitor_capture
  
  Use ‘buffer size’ instead of ‘buffer-size’
  
  Emit single ‘limit’ keyword for duration/packets/packet-len/every/pps
  
  Apply ‘size’ only when file_location is set
- Added create_empty_file API to create empty files using copy null
- Kept touch_file as a deprecated compatibility wrapper around create_empty_file
- Updated execute_write_memory to use config-transaction commit on Controller-Managed devices while preserving write memory behavior on Autonomous devices.
- Updated free_up_disk_space to delete top level unprotected files before recursively cleaning unprotected directories.
- Updated dual RP free_up_disk_space wrapper to forward optional arguments such as allow_deletion_failure, dir_output, compact, and min_free_space_percent to the stack implementation.
- Fixed configure_hw_module_slot_reload, configure_hw_module_slot_start, configure_hw_module_slot_stop
  
  Changed from device.configure() to device.execute() since ‘hw-module slot …’ commands are EXEC mode commands, not configuration mode commands
  
  Updated unit tests to assert device.execute is called
- Modified free_up_disk_space API
  
  Traverse directories before same-level files during recursive cleanup.
  
  Delete larger files first while cleaning each recursive directory.
  
  Use an explicit longer timeout for recursive directory listings.
- Modified stack free_up_disk_space API
  
  Traverse directories before same-level files during recursive cleanup.
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_interface_storm_control_level
  
  test_api_unconfigure_interface_switchport_access_vlan
  
  test_api_unconfigure_interface_switchport_block_address
  
  test_api_unconfigure_interface_switchport_dot1q_ethertype
  
  test_api_unconfigure_interface_switchport_mode_access
  
  test_api_unconfigure_interface_switchport_port_security
  
  test_api_unconfigure_interface_switchport_port_security_violation
  
  test_api_unconfigure_interface_switchport_pvlan_association
  
  test_api_unconfigure_interface_switchport_pvlan_mapping
  
  test_api_unconfigure_interface_switchport_trunk_allowed_vlan
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_interface_template_sticky
  
  test_api_unconfigure_ip_dlep
  
  test_api_unconfigure_ip_on_atm_interface
  
  test_api_unconfigure_ip_on_interface
  
  test_api_unconfigure_ip_route_cache
  
  test_api_unconfigure_ipv4_dhcp_relay_helper
  
  test_api_unconfigure_ipv6_address_autoconfig
  
  test_api_unconfigure_ipv6_address_config
  
  test_api_unconfigure_ipv6_address_test
  
  test_api_unconfigure_ipv6_dhcp_relay
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_ipv6_enable
  
  test_api_unconfigure_ipv6_mtu
  
  test_api_unconfigure_ipv6_nd_dad_processing
  
  test_api_unconfigure_ipv6_nd_suppress_ra
  
  test_api_unconfigure_ipv6_redirects
  
  test_api_unconfigure_mdns_on_interface_vlan
  
  test_api_unconfigure_medium_p2p_interface
  
  test_api_unconfigure_monitor_erspan_source_interface
  
  test_api_unconfigure_phymode_ignore_linkup_fault
  
  test_api_unconfigure_port_channel_mode
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_port_channel_ip
  
  test_api_unconfigure_port_channel_lacp_max_bundle
  
  test_api_unconfigure_port_channel_standalone_disable
  
  test_api_unconfigure_portchannel_dpi_algorithm
  
  test_api_unconfigure_power_efficient_ethernet_auto
  
  test_api_unconfigure_power_inline
  
  test_api_unconfigure_ppp_multilink
  
  test_api_unconfigure_pppoe_enable_interface
  
  test_api_unconfigure_profile_on_tunnel_interface
  
  test_api_unconfigure_service_instance
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_span_monitor_session
  
  test_api_unconfigure_subinterface
  
  test_api_unconfigure_switchport_nonegotiate
  
  test_api_unconfigure_switchport_protected
  
  test_api_unconfigure_switchport_pvlan_trunk_allowed_vlan
  
  test_api_unconfigure_switchport_pvlan_trunk_native_vlan
  
  test_api_unconfigure_switchport_trunk_allowed_vlan
  
  test_api_unconfigure_switchport_trunk_native_vlan
  
  test_api_unconfigure_switchport_trunk_native_vlan_tag
  
  test_api_unconfigure_system_debounce_link_down_timer
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_system_debounce_link_up_timer
  
  test_api_unconfigure_vfi
  
  test_api_unconfigure_vrf_select_source
  
  test_api_unshut_port_channel
  
  test_api_clear_crypto_ikev2_stats
  
  test_api_clear_crypto_sa_counters
  
  test_api_configure_crypto_ikev2_keyring
  
  test_api_configure_crypto_ikev2_policy
  
  test_api_configure_crypto_ikev2_proposal
  
  test_api_configure_crypto_ipsec_nat_transparency
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_configure_crypto_map
  
  test_api_configure_crypto_transform_set
  
  test_api_configure_ikev2_profile_pre_share
  
  test_api_configure_interface_tunnel_mode_ipsec
  
  test_api_configure_ipsec_df_bit
  
  test_api_configure_ipsec_fragmentation
  
  test_api_configure_ipsec_ike_sa_strength_enforcement
  
  test_api_configure_ipsec_sa_global
  
  test_api_configure_ipsec_transform_set
  
  test_api_configure_ipsec_tunnel
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_configure_sks_client
  
  test_api_unconfigure_crypto_ikev2_keyring
  
  test_api_unconfigure_crypto_ikev2_policy
  
  test_api_unconfigure_crypto_ikev2_proposal
  
  test_api_unconfigure_crypto_ipsec_nat_transparency
  
  test_api_unconfigure_crypto_transform_set
  
  test_api_unconfigure_ikev2_profile_pre_share
  
  test_api_unconfigure_interface_tunnel_mode_ipsec
  
  test_api_unconfigure_ipsec_df_bit
  
  test_api_unconfigure_ipsec_fragmentation
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_ipsec_ike_sa_strength_enforcement
  
  test_api_unconfigure_ipsec_profile
  
  test_api_unconfigure_ipsec_sa_global
  
  test_api_unconfigure_ospfv3_authentication_null
  
  test_api_unconfigure_sks_client
  
  test_api_configure_ipv6_dhcp_pool_preifx_delegation_pool
  
  test_api_configure_ipv6_flow_monitor_sampler
  
  test_api_configure_ipv6_local
  
  test_api_configure_ipv6_local_pool
  
  test_api_configure_ipv6_nd_cache_expire
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_ipv6_nd_cache_expire
  
  test_api_configure_dhcpv6_guard_policy
  
  test_api_clear_isis
  
  test_api_config_interface_isis
  
  test_api_config_interface_with_isis_router_name
  
  test_api_configure_interface_ipv6_isis_router_name
  
  test_api_configure_interface_isis_network
  
  test_api_configure_isis_authentication_key_chain
  
  test_api_configure_isis_authentication_mode
  
  test_api_configure_isis_circuit_type
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_configure_isis_interface_metric
  
  test_api_configure_isis_keychain_key
  
  test_api_configure_isis_metric_style
  
  test_api_configure_isis_network_entity
  
  test_api_configure_isis_network_type
  
  test_api_configure_isis_nsf_xfsu
  
  test_api_configure_isis_password
  
  test_api_configure_isis_redistributed_connected
  
  test_api_configure_isis_router_configs
  
  test_api_configure_isis_with_router_name_network_entity
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_configure_router_isis
  
  test_api_remove_isis_configuration
  
  test_api_unconfig_interface_isis
  
  test_api_unconfig_interface_isis_router_name
  
  test_api_unconfigure_isis_authentication_key_chain
  
  test_api_unconfigure_isis_authentication_mode
  
  test_api_unconfigure_isis_circuit_type
  
  test_api_unconfigure_isis_interface_metric
  
  test_api_unconfigure_isis_keychain_key
  
  test_api_unconfigure_isis_password
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_isis_router_configs
  
  test_api_unconfigure_isis_vrf
  
  test_api_unconfigure_isis_with_router_name
  
  test_api_crypto_key_export
  
  test_api_generate_crypto_key
  
  test_api_generate_crypto_key_execute
  
  test_api_configure_evpn_instance_vlan_based_flood_suppression
  
  test_api_configure_l2vpn_evpn_ethernet_segment
  
  test_api_configure_l2vpn_evpn_ethernet_segment_all_active
  
  test_api_configure_l2vpn_vfi_context_vpls
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli
  
  test_api_unconfigure_evpn_instance_vlan_based_flood_suppression
  
  test_api_unconfigure_l2vpn_vfi_context_vpls
  
  test_api_clear_lacp_counters
  
  test_api_configure_lacp_port_priority
  
  test_api_configure_lacp_ratefast
  
  test_api_configure_lacp_system_priority
  
  test_api_configure_port_channel_mode
  
  test_api_unconfigure_lacp_port_priority
  
  test_api_unconfigure_lacp_ratefast
  
  test_api_unconfigure_lacp_system_priority
- Removed mock_data.yaml files for the above tests as they are no longer needed
- Modified remove_port_channel_interface API
  
  Render the IOS XE port-channel interface name without an invalid embedded space.
- Modified request_system_shell API
  
  Preserve the underlying error details when system shell entry fails.
- Modified touch_file in ie3k platform execute
  
  Replaced bash_console/SELinux approach with ‘copy null:’ command.
  
  Updated unit test in test_api_touch_file.py accordingly.
- Updated ROMMON TFTP recovery error handling to report missing TFTP information for dual-RP devices.
- Modified remove_ospf_passive_interface API
  
  Added optional vrf_name argument to support removing passive interfaces under VRF-aware OSPF process configuration
ios
- Modified configure_simulator_radius_subscriber API to support
  
  Negating VSA lines when negate=True (emits no vsa ...)
- Added unit test coverage for the above change.
updated api unit tests
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_rep_ztp
  
  clear_ipv6_rip
  
  config_interface_ripng
  
  configure_rip
  
  configure_ripng
  
  unconfig_interface_ripng
  
  unconfigure_ripng
  
  configure_route_map_match_length
  
  configure_route_map_permit
  
  configure_route_map_route_map
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_route_map_permit
  
  configure_ipv6_route_nexthop_vrf
  
  configure_ipv6_static_route
  
  configure_routing_ipv6_route
  
  configure_routing_ipv6_route_vrf
  
  configure_routing_static_route
  
  configure_routing_static_routev6
  
  configure_scale_static_route_via_tftp
  
  configure_stack_mac_persistent_timer
  
  configure_system_jumbomtu
- IOSXE
  
  Updated unittests to new testing method
  
  configure_tftp_source_interface
  
  disable_ipv6_multicast_routing
  
  enable_ipv6_multicast_routing
  
  enable_keepalive_on_interface
  
  remove_static_route_all
  
  unconfigure_ipv6_route_nexthop_vrf
  
  unconfigure_ipv6_static_route
  
  unconfigure_ipv6_unicast_routing
  
  unconfigure_routing_ip_route_vrf
  
  unconfigure_routing_ipv6_route
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_routing_ipv6_route_vrf
  
  unconfigure_routing_static_routev6
  
  unconfigure_stack_mac_persistent_timer
  
  unconfigure_system_mtu
  
  unconfigure_tftp_source_interface
  
  configure_scp_local_auth
  
  unconfigure_scp_local_auth
  
  configure_switchport_port_security_aging_time
  
  configure_switchport_port_security_aging_type
  
  configure_switchport_port_security_mac_address
- IOSXE
  
  Updated unittests to new testing method
  
  config_erspan_monitor_session_filter
  
  config_erspan_monitor_session_shut_unshut
  
  configure_interface_monitor_session_mtu
  
  configure_interface_monitor_session_no_mtu
  
  configure_interface_monitor_session_shutdown_erspan_dest
  
  configure_local_span_destination
  
  configure_local_span_filter
  
  configure_local_span_source
  
  unconfig_erspan_monitor_session_no_filter
  
  unconfig_erspan_monitor_session_no_source
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_local_span_destination_interface
  
  unconfigure_local_span_filter
  
  unconfigure_local_span_source
  
  configure_default_spanning_tree
  
  configure_default_spanning_tree_mode
  
  configure_default_spanning_tree_vlan
  
  configure_spanning_tree_backbonefast
  
  configure_spanning_tree_bpdufilter
  
  configure_spanning_tree_bpdufilter_disable
  
  configure_spanning_tree_bpdugaurd
- IOSXE
  
  Updated unittests to new testing method
  
  configure_spanning_tree_bridge_assurance
  
  configure_spanning_tree_etherchannel_misconfig
  
  configure_spanning_tree_guard_loop
  
  configure_spanning_tree_guard_root
  
  configure_spanning_tree_mode
  
  configure_spanning_tree_mst_configuration
  
  configure_spanning_tree_mst_configuration_name
  
  configure_spanning_tree_mst_configuration_revision
  
  configure_spanning_tree_mst_priority
  
  configure_spanning_tree_portfast
- IOSXE
  
  Updated unittests to new testing method
  
  configure_spanning_tree_portfast_bridge_assurance
  
  configure_spanning_tree_portfast_bridge_assurance_on_interface
  
  configure_spanning_tree_portfast_default
  
  configure_spanning_tree_portfast_on_interface
  
  configure_spanning_tree_priority
  
  configure_spanningtree_sso_block_tcn
  
  configure_spanning_tree_uplinkfast
  
  configure_spanning_tree_vlan_root
  
  unconfigure_spanning_tree_backbonefast
  
  unconfigure_spanning_tree_bpdufilter
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_spanning_tree_bpdufilter
  
  unconfigure_spanning_tree_bridge_assurance
  
  unconfigure_spanning_tree_etherchannel_misconfig
  
  unconfigure_spanning_tree_guard_loop
  
  unconfigure_spanning_tree_guard_root
  
  unconfigure_spanning_tree_mode
  
  unconfigure_spanning_tree_mst_configuration
  
  unconfigure_spanning_tree_portfast
  
  unconfigure_spanning_tree_portfast_bridge_assurance
  
  unconfigure_spanning_tree_portfast_bridge_assurance_on_interface
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_spanning_tree_portfast_on_interface
  
  unconfigure_spanning_tree_priority
  
  unconfigure_spanningtree_sso_block_tcn
  
  unconfigure_spanning_tree_uplinkfast
  
  unconfigure_spanning_tree_vlan_root
  
  configure_global_dual_active_recovery_reload_disable
  
  configure_global_stackwise_virtual
  
  configure_stackwise_virtual_dual_active_interfaces
  
  configure_stackwise_virtual_dual_active_pagp
  
  unconfigure_spanningtree_cost_on_interface
- IOSXE
  
  Updated unittests to new testing method
  
  unconfigure_stackwise_virtual_dual_active_interfaces
  
  unconfigure_stackwise_virtual_dual_active_pagp
  
  unconfigure_stackwise_virtual_interfaces
  
  configure_subscriber_template
  
  configure_platform_sudi_cmca3
  
  configure_service_private_config_encryption
  
  unconfigure_platform_sudi_cmca3
  
  unconfigure_service_private_config_encryption
  
  configure_ecomode_optics
  
  configure_auto_off_optics
- IOSXE
  
  Updated unittests to new testing method
  
  configure_smartpower_domain
  
  configure_smartpower_domain_default
  
  configure_smartpower_endpoint_default
  
  configure_smartpower_importance
  
  configure_smartpower_importance_default
  
  configure_smartpower_keywords
  
  configure_smartpower_keywords_default
  
  configure_smartpower_level
  
  configure_smartpower_level_default
  
  configure_smartpower_management_default
- IOSXE
  
  Updated unittests to new testing method
  
  configure_system_debounce_link_up_timer_doppler
  
  unconfigure_system_debounce_link_up_timer_doppler
blitz
- Modified gnmi_util script to handle prefixes for augmented models
powercycler
- Validates proxy start_socat_relay results before unpacking so relay setup failures report the underlying proxy relay error instead of raising TypeError.
- Drains pending pysnmp asyncio callbacks before closing the SNMP dispatcher so successful SNMP powercycler operations do not log non-fatal “Unregistered transport” errors.
- Add actionable, non-secret logging for incomplete SNMPv3 credentials and credential-related command TypeErrors.
sdk/apis/utils
- Updated copy_to_device and copy_from_device to use the device’s local IP for the dynamic file server when the management session source IP is the device’s gateway (e.g. VXR/NATed setups). Previously the dynamic file server was only used when the local IP was directly present in the management source IP list, which caused failures for devices whose management traffic egresses through a gateway.
- Added helper _management_session_uses_gateway that detects when the management session source IP matches either the configured management gateway in the testbed or an inferred gateway (.1/.254) for the management IPv4 subnet.
dependencies
- Updated pyasn1 pin to >=0.6.4 to address CVE-2026-23490, CVE-2026-30922, CVE-2026-59885

Modified

iosxe
- Modified
  
  configure_bba_group
  
  Added session_per_vlan_limit and session_per_mac_limit optional parameters
  
  unconfigure_bba_group
  
  Modified vt_number to be optional
- Enhanced configure_policy_map_type_control
  
  Added optional per-class class_name field (default always) so callers can render custom class-map predicates such as class type control ISG-IP-UNAUTH event timed-policy-expiry.
  
  Backward compatible - existing callers omit class_name and continue to emit class type control always event <event>.
- Added unit test coverage for the new class_name field.

genie.libs.parser

New

iosxe
- Added ShowPlatformSoftwareFedIpRouteSummary
  
  Parser for ‘show platform software fed {switch_var} {state} ip route summary’ command.
- Added ShowPlatformSoftwareIpsecPolicyStatistics
  
  Added schema and parser for ‘show platform software ipsec policy statistics’
- Added ShowPlatformSoftwareIpsecSwitchFlowAll
  
  Added schema and parser for ‘show platform software ipsec {switch} {switch_var} f0 flow all’
- Added ShowPlatformSoftwareIpsecSwitchSadbAll
  
  Added schema and parser for ‘show platform software ipsec {switch} {switch_var} f0 sadb all’
- Added ShowPlatformHardwareFedSwitchFwdAsicResourceFeatureIdMapping
  
  Added schema and parser for ‘show platform hardware fed {switch} {switch_var} fwd-asic resource feature-id-mapping’
- Added ShowPlatformHardwareFedSwitchActiveFwdAsicResourceUtilizationFeature
  
  Added schema and parser for ‘show platform hardware fed {switch} {switch_var} fwd-asic resource utilization feature {feature_id}’
- Added ShowCryptoIkev2Profile
  
  Added schema and parser for ‘show crypto ikev2 profile {profile_name}’
- Added ShowRunningConfigFormatNetconfXml
  
  show running-config | format netconf-xml
- Added ShowYangSyncStatus
  
  show yang sync status
- Added ShowPlatformHardwareFedSwitchQosQueueConfig
  
  Added schema and parser for ‘show platform hardware fed switch active qos queue config interface {interface}’
- Added ShowSubscriberDefaultSession
  
  show subscriber default-session
- Added ShowTopology, ShowTopologyAll, ShowTopologyDetailAll, ShowTopologyDetailAfi, ShowTopologyDetailVrf
  
  show topology
  
  show topology all
  
  show topology detail all
  
  show topology detail {ipv4 | ipv6} all
  
  show topology detail {ipv4 | ipv6} topo <topo_name>
  
  show topology detail {ipv4 | ipv6} multicast all
  
  show topology detail {ipv4 | ipv6} multicast topo {topo_name}
  
  show topology detail vrf {vrf} all
  
  show topology detail vrf {vrf} {ipv4 | ipv6} all
  
  show topology detail vrf {vrf} {ipv4 | ipv6} topo <topo_name>
  
  show topology detail vrf {vrf} {ipv4 | ipv6} {multicast} all
  
  show topology detail vrf {vrf} {address_family} {multicast} topo {topo_name}
- Added ShowVpdnGroupSelectDefault
  
  show vpdn group-select default
- Added ShowVpdnSession
  
  Added schema and parser for ‘show vpdn session’
- Added ShowCloudMgmtMigration
  
  show cloud-mgmt migration
- Added ShowCloudMgmtCompatibility
  
  show cloud-mgmt compatibility
- Added ShowPlatformHardwareQfpActiveClassificationClassGroupAll
  
  show platform hardware qfp active classification class-group-manager class-group all
- Added ShowSubscriberSessionFeatureAccessList
  
  show subscriber session feature access-list
  
  show subscriber session uid {uid} feature access-list
- Added ShowSubscriberSessionFeatureL4Redirect
  
  show subscriber session feature l4redirect
  
  show subscriber session uid {uid} feature l4redirect
- Modified ShowSubscriberSessionDetailed
  
  show subscriber session uid {uid} detailed
iosxr
- Added ShowInventoryVendorType
  
  Added schema and parser for ‘show inventory vendor-type’ command.
iosxe
- Added output changes in show meraki config updater command to include new fields for better visibility of configuration updates.
- Added output changes in show cloud_mgmt config updater command to include new fields for better visibility of configuration updates.

Fix

iosxe
- Modified ShowInventory (rv1)
  
  Recognize StackWise-Virtual Switch N Slot M Linecard/Supervisor/Router inventory names so slot_dict is bound for chassis such as the C9600 SVL.
  
  Guard the pluggable/transceiver branch to prevent UnboundLocalError when slot_dict has not been assigned.
  
  Recognize SM subslot <slot>/<subslot> inventory lines.
- Modified ShowIpCefInternal
  
  Added support for parsing Lookup in table output chain entries
- Modified ShowIpv6CefInternal
  
  Added support for parsing Lookup in table output chain entries
- Modified ShowPlatformSoftwareFedSwitchActiveIpRouteDetail
  
  Added parsing support for VRF route detail output with VXLAN next-hop information.
  
  Added parsing support for global leaked route LOOKUP object output.
- Added ShowPlatformSoftwareFedSwitchActiveIpv6RouteDetail
  
  Added parsing support for IPv6 FED route detail output.
  
  Added parsing support for IPv6 VRF VXLAN next-hop details.
  
  Added parsing support for IPv6 global leaked route LOOKUP object output.
- Added golden output testcases for EVPN route leaking IPv4 and IPv6 FED route detail validation.
- Modified ShowPlatformRewriteUtilization
  
  Modified parser by adding cli ‘show platform hardware fed {switch} {active} fwd-asic resource rewrite utilization’ and ‘show platform hardware fed {active} fwd-asic resource rewrite utilization’
- Modified ShowPlatformSoftwareFedIfm
  
  Modified parser by adding cli ‘show platform software fed {switch} {active} ifm interfaces tunnel’ and ‘show platform software fed {active} ifm interfaces tunnel’
- Added fix for ShowPlatformSoftwareFedActiveAclBindDbSummary parser.
  
  Added this fix to support multiple entries.
- Added fix for ShowPlatformSoftwareFedSwitchActiveAclInfoSdkDetail parser.
  
  Added this fix to support multiple entries.
- Modified <ShowCtsEnvironmentData>
  
  Added support to parse the transport_type field.
- Modified ShowPlatformSoftwareFedIpv6MldSnoopingSummary parser
  
  Enhancement added for “show platform software fed switch active ipv6 mld snooping summary”.
- Modified ShowPlatformHardwareFedSwitchFwdAsicInsightIpSourceGuardAcl
  
  Added support for parsing IPv6 SIP entries without Source MAC (delegated/PD prefix entries)
- Modified ShowPlatformSoftwareFedSwitchIfmInterfaceName
  
  Added support for parsing “Mpp port oid”
- Modified ShowIpNbarDiscovery
  
  Modified P1 regex to match “Five gigabit” interface
- Modified ShowAuthenticationSessionsDetailsSuperParser
  
  Added server_policies vlan_group parsing and schema support for ‘show authentication sessions interface {interface} details’.
  
  Refined UT expected data for interface details to align with real output containing dual MAC sessions and per-session server_policies vlan_group values.
- Modified ShowIpv6MldSnoopingVlan
  
  Made ‘mld’ key Optional at global level
  
  Added Optional ‘oper_state’ key at global level
  
  Added Optional ‘admin_state’ and ‘oper_state’ keys at VLAN level
  
  Added vlan-level ‘max_response_time’ parsing
  
  Improved parsing logic to separate global and VLAN level fields
- Modified ShowIpv6ProtocolsSchema schema
  
  Added support for connected and static protocols
- Modified ShowIpv6Protocols parser
  
  REGEX update to match connected and static
  
  Add connected and static protocols info in the dict
- Modified ShowParameterMapTypeInspectParam
  
  Changed keys audit_trail, max_incomplete, one_minute, sessions_rate, udp, icmp, dns_timeout, tcp, zone_mismatch_drop, application_inspect, and sessions_maximum from schema to Optional.
  
  Added parsing support for lisp inner packet inspection and exposed it as lisp_inner_packet_inspection.
  
  Added a golden output testcase for show parameter-map type inspect global to validate parsing when those sections are absent.
- Modified ShowPlatformHardwareFedSwitchFwdAsicInsightL2AttachmentCircuit parser
  
  Enhancement added for “show platform hardware fed switch fwd asic insight l2 attachment circuit”.
- Modified ShowPlatformSoftwareFedSwitchIfmInterfaceName parser
  
  Added support for parsing “speed”
- Modified ShowPlatformSoftwareFedIpIgmpSnoopingSummary parser
  
  Enhancement added for “show platform software fed switch active ip igmp snooping summary”.
- Modified ShowPlatformSoftwareFedSwitchWdavcFlows
  
  Updated regex pattern p1 to match software-handled (SW) flows in addition to hardware-handled (HW) flows.
- Modified ShowSdmPreferNew parser
  
  Updated schema for missing fields and made those fields Optional.
  
  Updated parser for ‘show sdm prefer’ and ‘show sdm prefer custom’ on C9500 to handle generic current/proposed feature lines and proposed-only feature lines.
- Modified ShowPlatformSoftwareFedMatmMacTable
  
  Added support for MATM output without machandle, siHandle, riHandle, and diHandle columns.
- Modified ShowPlatformSoftwareFedSwitchActiveMatmMacTableVlanMac
  
  Added support for MATM vlan/mac output without machandle, siHandle, riHandle, and diHandle columns.
- Modified ShowPortSecurityAddress
  
  Updated port field parsing to support short interface names.
- Modified ShowLldpNeighborsInterfaceDetail
  
  Made ‘compiled’ field as optional in schema to support outputs that do not contain ‘compiled’ field.
  
  Added ‘age_sec’ and ‘time_since_last_update_sec’ fields as optional.
- Modified ShowCloudMgmtConnect
  
  Fixed section header regex (p2) to match Cloud-Mgmt prefixed section headers
  
  Fixed p3 pattern to match ‘service cloud-mgmt connect is disabled’
- Modified ShowCloudMgmtConfigUpdater
  
  Renamed p4_1/p4_2 to p4a/p4b to align with ShowMerakiConfigUpdater naming convention
  
  Fixed p0 pattern to match ‘service cloud-mgmt connect is disabled’
- Modified ShowCloudMgmtCompatibility
  
  Changed cloud_mgmt_cloud_monitoring and cloud_mgmt_cloud_management to Optional in schema to support empty output
iosxr
- Modified ShowProcessesMemoryDetail
  
  Added optional pid key to the schema.
  
  Updated regex pattern to accommodate show processes memory detail output with PID column.
- Modified ShowPlatform
  
  Modified parser for ‘show platform’ command for new State
linux
- Modified Ls
  
  Updated command execution to build ls -{args} and ls -{args} {directory} from parser arguments.
  
  Added l to supplied option arguments when long-listing output is not requested so the parser receives the expected output shape.
  
  Added golden fixture coverage for ls -{args} and ls -{args} {directory}.
apic
- Modified Ls
  
  Updated command execution to build ls -{args} and ls -{args} {directory} from parser arguments.
  
  Added l to supplied option arguments when long-listing output is not requested so the parser receives the expected output shape.
  
  Added golden fixture coverage for ls -{args} and ls -{args} {directory}.
nxos
- Modified Ls
  
  Added golden fixture coverage for the inherited NXOS ACI Ls command forms.
common
- Modified package metadata
  
  Added SDK generator parser datafiles to installed package data for make json_all.
  
  Updated the parser development package version to satisfy the current genie dependency range during CI installs.
- Modified _fuzzy_search_command
  
  Added exact command lookup after command preprocessing so normalized commands still resolve to their exact parser when available.
  
  Updated fuzzy token scoring to prefer exact token matches over argument captures.
  
  Added unittest coverage for fuzzy matching and argument extraction regressions.

Modified

iosxe
- Modified ShowInterfaceCounterErrors
  
  show interfaces counters errors
  
  show interfaces {interface} counters errors
- Modified ShowIpCefDetail
  
  Added support for parsing LISP related nexthops and remote EID stats
- Modified ShowSubscriberSessionDetailed
  
  Updated regex to support multi-word Access-type and Client values in the config history section
- Modified ShowPlatformSoftwareFedSwitchActiveStpVlan
  
  Made ‘ingress’ and ‘egress’ fields as optional in schema to support outputs that do not contain the ‘ingress’ and ‘egress’ fields.