April 2026

April 28 - Genie v26.4

New Module Versions

Modules

Version

genie

v26.4

genie.lamp

v26.4

genie.libs.health

v26.4

genie.libs.clean

v26.4

genie.libs.conf

v26.4

genie.libs.filetransferutils

v26.4

genie.libs.ops

v26.4

genie.libs.parser

v26.4

genie.libs.robot

v26.4

genie.libs.sdk

v26.4

genie.telemetry

v26.4

genie.trafficgen

v26.4

Changelogs

genie

New
  • abstraction

    • Added merged abstract package lookup support for Lookup(*tokens, packages=(...)) while preserving dict-based package lookups and covering the new behavior with unit tests

Fix
  • abstraction

    • Optimized frame lookup in declare_package by using sys._getframe() instead of inspect.stack()

    • Optimized frame lookup in declare_token by using sys._getframe() instead of inspect.stack()

    • Optimized frame lookup in magic.py by using sys._getframe() instead of inspect.stack()

genie.lamp

Fix
  • shell

    • Move cmd2 persistent history file from ~/lamp_history.dat to

  • history

    • Move advanced history file from ~/lamp_adv_history.dat to

genie.libs.clean

Fix
  • stages

    • Updated ApplyConfiguration stage to pass timeout to show running-config and show startup-config commands to prevent timeout

    • Update Connect stage to use parameters.internal for correct result_rollup handling

    • Updated ConfigureInterfaces to disable switchport before configuring ipv4/ipv6 address on interfaces that default to L2 mode

  • clean-pkg
    • InstallImage stage

      • Added validation check for empty output after install command execution

      • If the install command returns no output, log an error and fail the step.

    • stages/CopyToDevice

      • Use the actual destination path from the history, if the file was renamed during copying, we are checking for the correct file on the device.

  • stages/iosxe

    • Update Connect stage to use parameters.internal and disable result_rollup on all steps when recovery is enabled

  • iosxe
    • InstallImage stage

      • Fixed unnecessary two-time ‘dir’ command parsing.

      • Moved ‘packages.conf’ creation to use touch_file API.

      • Removed duplicate ignore-startup-config verification from verify_boot_variable.

    • ConfigureManagement stage

      • Added detailed log messages for interface status verification failures.

    • CopyToDevice stage

      • Merged ‘get filesize’ local & remote steps into one.

  • iosxe/ie3k
    • InstallImage stage

      • Removed duplicate install_image function logic already present in IOS-XE.

      • Added configure_no_boot_manual to order.

    • RommonBoot stage

      • Complete revamp with correct logic.

  • clean/stages/copy_to_device

    • Modified the copy_to_device stage to verify sufficient free space on device even if image files already exist on the device.

New
  • clean/apply_configuration

    • Added skip_if_no_config option to skip apply configuration if no configuration is provided.

  • stages/configure_management

    • Added check for master key security configuration and configure master key if missing.

  • linux

    • Added image handler to linux.

    • Added api to execute configuration lines on linux devices, as linux does not have a configure method.

  • stages/configure_interfaces

    • Added api to apply configuration lines to device.

  • iosxe/ie3k

    • Added WriteErase stage.

  • iosxe/ie9k

    • Added RommonBoot stage.

    • Added InstallImage stage.

    • Added WriteErase stage.

genie.libs.conf

Fix
  • linux

    • Added support for Linux configure interfaces in clean yaml.

  • nxos
    • Modified

      • updating the interface configuration from ‘mac address <>’ to ‘mac-address <>’

genie.libs.filetransferutils

Fix
  • common
    • Modified

      • Updated FileUtils abstraction resolution to use merged abstract package lookups for base and extension filetransferutils plugins

  • protocols/http

    • Ignore SSL errors for stat.

New
  • protocols

    • Added https support.

genie.libs.health

genie.libs.ops

genie.libs.robot

genie.libs.sdk

Modified
  • iosxe
    • Enchanced api for configure_crypto_ikev2_proposal

      • Added new args to api configure_crypto_ikev2_proposal .

    • Enchanced api for configure_ikev2_profile

      • Added new args to api configure_ikev2_profile .

    • Enchanced api for config_extended_acl

      • Added new args to api config_extended_acl .

New
  • ios
    • Added IOS SDK API support for

      • enable_debug

      • disable_debug

    • Matches existing iosxe debug API style and naming.

    • Added unit test coverage for the new APIs.

    • Added IOS SDK API support for

      • configure_ip_cef

      • unconfigure_ip_cef

    • Added unit test coverage for the new APIs.

    • Added IOS SDK API support for

      • configure_interface

      • unconfigure_interface

    • Supports optional IPv4/IPv6 addressing, MAC address, ipv6 enable,

    • Added unit test coverage for the new APIs.

    • Added IOS SDK API support for

      • configure_interface_ipv6_nd

      • unconfigure_interface_ipv6_nd

    • Supports optional ipv6 enable, ns-interval, dad attempts, keepalive,

    • Added unit test coverage for the new APIs.

    • Added IOS SDK API support for

      • configure_simulator_radius_subscriber

      • unconfigure_simulator_radius_subscriber

      • configure_service_simulator_radius

      • unconfigure_service_simulator_radius

    • Supports optional attributes, VSAs, authentication, service type,

    • Added unit test coverage for the new APIs.

    • Added IOS SDK API support for

      • configure_simulator_radius_server

      • unconfigure_simulator_radius_server

      • configure_simulator_radius_key

      • unconfigure_simulator_radius_key

    • Supports optional user-name prefixes and client shared-secret.

    • Added unit test coverage for the new APIs.

  • iosxe/management

    • Added configure_management_master_key API to check and configure master key.

  • iosxe
    • Added

      • configure_crypto_mib_ipsec_flowmib_history_failure_size API

    • Added API configure_redundancy_interchassis_group

      • added api to configure redundancy interchassis group

    • Added execute_show_ipv6_dhcp_interface, execute_show_ipv6_dhcp_interface_all to dhcpv6-execute.py

      • New API support for ‘show ipv6 dhcp interface’ and ‘show ipv6 dhcp interface {interface}’ cli

    • API for unconfigure_ip_igmp_access_group

    • Added API configure_mpls_label_range

    • Added API unconfigure_mpls_label_range

    • Added configure_ip_igmp_filter

    • Added unconfigure_ip_igmp_filter

    • Added configure_igmp_filter_on_interface

    • Added unconfigure_igmp_filter_on_interface

    • Added configure_igmp_profile

    • Added unconfigure_igmp_profile

    • Added test_system_secure_db API

      • Added new api to execute the “test system secure db” command

    • Added test_system_secure_all API

      • Added new api to execute the “test system secure all” command

    • KEY

      • Added api for configure_key_config_key_password_encrypt

      • Added api for unconfigure_key_config_key_password_encrypt

    • Added API enable_autoconfig

      • added api to configure uplink autoconfig

    • Added VPDN clear execute APIs

      • execute_clear_vpdn_dead_cache_all

      • execute_clear_vpdn_dead_cache_ip_address

      • execute_clear_vpdn_dead_cache_group

      • execute_clear_vpdn_tunnel_l2tp_all

      • execute_clear_l2tp_all

    • Added configure_vrf_route_leak_static

    • Added unconfigure_vrf_route_leak_static

    • Added API configure_vpdn_group enhancements

      • added support for prioritized initiate-to ip entries and l2tp tunnel busy timeout

    • Added APIs for vpdn l2tp attributes

      • added configure helper for the initial-received-lcp-confreq attribute

      • added configure and unconfigure helpers for the physical-channel-id attribute

    • Added

      • configure_crypto_mib_ipsec_flowmib_history_tunnel_size API

    • Added AAA SDK API support for

      • no aaa accounting network default group

      • aaa authentication ppp default group

    • Added unit test coverage for the new APIs and the existing

    • Added configure_interface_port_settings to interface-configure.py

      • New API support for ‘port-settings speed {speed} duplex {duplex} autoneg {autoneg}’ cli

    • Added unconfigure_interface_port_settings to interface-configure.py

      • New API support for ‘no port-settings speed {speed}’, ‘no port-settings duplex {duplex}’, ‘no port-settings autoneg {autoneg}’ cli

    • Added default_interface_port_settings to interface-configure.py

      • New API support for ‘default port-settings [speed] [duplex] [autoneg]’ cli

    • Added configure_ospfv3_max_path

      • configure maximum number of equal cost paths for OSPFv3.

    • Added API touch_file.

    • Added API get_filesystems.

    • Added unconfigure_ip_fqdn_acl API

      • Added new api to unconfigure ip fqdn acl

    • Added

      • configure_crypto_isakmp_enable API

  • iosxe/ie3k

    • Added API touch_file.

    • Added API get_recovery_details.

    • Added API execute_rommon_reset.

    • Added API device_rommon_boot.

    • Added API password_recovery.

  • iosxe/ie9k

    • Added API touch_file.

    • Added API get_recovery_details.

    • Added API execute_rommon_reset.

    • Added API device_rommon_boot.

    • Added API password_recovery.

Fix
  • iosxe
    • Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli

      • test_unconfigure_ipv6_flow_monitor

      • test_unconfigure_monitor_capture_buffer_size

      • test_unconfigure_monitor_capture_limit_packet_len

      • test_unconfigure_monitor_capture_without_match

      • test_unconfigure_record_configs_from_flow_monitor

      • test_unconfigure_sampler

      • test_configure_flow_monitor_sampler_fnf_sampler

      • test_configure_crypto_map_for_gdoi

      • test_configure_gdoi_group

      • test_unconfigure_crypto_map_for_gdoi

    • Removed mock_data.yaml files for the above tests as they are no longer needed

    • Added API for configuring live-protect shield enforcing mode

      • configure_platform_security_live_protect_shield_enforcing

      • unconfigure_platform_security_live_protect_shield_enforcing

    • Modified the following unit tests to replace mock_data.yaml usage with unittest.mock.Mock

      • test_api_configure_interface_vlan_standby_ip

      • test_api_configure_interface_vlan_standby_preempt

      • test_api_configure_interface_vlan_standby_timers

      • test_api_configure_vrrp_interface

      • test_api_unconfigure_hsrp_interface

      • test_api_unconfigure_interface_vlan_standby_ip

      • test_api_unconfigure_interface_vlan_standby_preempt

      • test_api_unconfigure_interface_vlan_standby_timers

      • test_api_unconfigure_vrrp_interface

      • test_api_configure_hw_module_slot_shutdown

    • Removed mock_data.yaml files associated with the above unit tests as they are no longer required

    • Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli

      • test_api_unconfigure_ip_igmp_snooping_vlan_querier

      • test_api_unconfigure_ip_igmp_snooping_vlan_query_version

      • test_api_unconfigure_ip_igmp_snooping_vlan_static

      • test_api_unconfigure_ip_igmp_snooping_vlan_vlanid

      • test_api_clear_crypto_call_admission_stats

      • test_api_clear_crypto_session

      • test_api_configure_crypto_logging_ikev2

      • test_api_configure_ikev2_authorization_policy

      • test_api_configure_ikev2_cac

      • test_api_configure_ikev2_dpd

    • Removed mock_data.yaml files for the above tests as they are no longer needed

    • Added configure_ignore_startup_config

      • Added configure_ignore_startup_config to c8kv.

    • Added execute_monitor_capture_file_location_flash

      • execute monitor capture file location flash command enhancement

    • Modified the following unit tests to replace mock_data.yaml usage with unittest.mock.Mock

      • test_api_configure_server_redundancy_under_gkm_group

      • test_api_configure_gnxi

      • test_api_configure_400g_mode_for_port_group

      • test_api_configure_400g_mode_for_port_group_onsvl

      • test_api_configure_400g_mode_port_group_range

      • test_api_configure_hw_module_breakout

      • test_api_unconfigure_400g_mode_for_port_group

      • test_api_unconfigure_400g_mode_for_port_group_onsvl

      • test_api_unconfigure_400g_mode_port_group_range

      • test_api_unconfigure_hw_module_breakout

    • Removed mock_data.yaml files associated with the above unit tests as they are no longer required

    • Refactored the following unit tests as part of the API UT mock cleanup

      • test_api_unconfigure_hw_module_slot_shutdown

      • test_api_configure_icmp_ip_reachables

      • test_api_unconfigure_icmp_ip_reachables

      • test_api_configure_igmp_snooping_tcn_flood

      • test_api_configure_ip_igmp_querier_query_interval

      • test_api_configure_ip_igmp_querier_tcn_query_count

      • test_api_configure_ip_igmp_snooping

      • test_api_configure_ip_igmp_snooping_querier

      • test_api_configure_ip_igmp_snooping_vlan_querier

      • test_api_configure_ip_igmp_snooping_vlan_query_version

    • Removed mock_data.yaml files for the above tests as they are no longer needed

    • Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli

      • test_api_unconfigure_gdoi_group

      • test_api_unconfigure_gdoi_group_on_gm

      • test_api_configure_client_protocol_under_gkm_group

      • test_api_configure_gikev2_profile_under_gkm_group

      • test_api_configure_gkm_group_identity_number

      • test_api_configure_ipsec_under_gkm_group

      • test_api_configure_ipv4_server_under_gkm_group

      • test_api_configure_pfs_enable_or_disable_under_gkm_group

      • test_api_configure_protocol_version_optimize_cli_under_gkm_group

      • test_api_configure_rekey_under_gkm_group

    • Removed mock_data.yaml files for the above tests as they are no longer needed

    • Modified configure_interface_port_settings in interface-configure.py

      • Added optional combined_port_settings``argument to build a single combined``port-settings command

    • Modified unconfigure_interface_port_settings in interface-configure.py

      • Added optional combined_port_settings``argument to build a single combined``port-settings command

    • Modified default_interface_port_settings in interface-configure.py

      • Added optional combined_port_settings``argument to build a single combined``port-settings command

    • Refactored the following unit tests as part of the API UT mock cleanup

      • test_api_configure_ip_igmp_snooping_vlan_static

      • test_api_configure_ip_igmp_snooping_vlan_vlanid

      • test_api_unconfigure_igmp_snooping_tcn_flood

      • test_api_unconfigure_ip_igmp_querier_max_response_time

      • test_api_unconfigure_ip_igmp_querier_query_interval

      • test_api_unconfigure_ip_igmp_querier_tcn_query_count

      • test_api_unconfigure_ip_igmp_querier_tcn_query_interval

      • test_api_unconfigure_ip_igmp_querier_timer_expiry

      • test_api_unconfigure_ip_igmp_snooping

      • test_api_unconfigure_ip_igmp_snooping_querier

    • Removed mock_data.yaml files for the above tests as they are no longer needed

    • Modified the following unit tests to use unittest.mock.Mock instead of mock_device_cli

      • test_api_configure_ikev2_fragmentation

      • test_api_configure_ikev2_keyring

      • test_api_configure_ikev2_policy

      • test_api_configure_ikev2_profile

      • test_api_configure_ikev2_profile_advanced

      • test_api_configure_isakmp_key

      • test_api_configure_isakmp_policy

      • test_api_configure_modify_ikev2_profile

      • test_api_disable_crypto_engine_compliance

      • test_api_unconfigure_crypto_logging_ikev2

    • Removed mock_data.yaml files for the above tests as they are no longer needed

  • updated api unit tests
    • IOSXE
      • Updated unittests to new testing method

        • configure_bulkstat_profile

        • configure_call_admission

        • configure_call_home_reporting

        • configure_cdp_run

        • configure_clear_logging_onboard_slot_environment

        • configure_clear_logging_onboard_slot_temperature

        • configure_clear_logging_onboard_slot_voltage

        • configure_clear_logging_onboard_switch_environment

        • configure_clear_logging_onboard_switch_temperature

        • configure_clear_logging_onboard_switch_voltage

    • IOSXE
      • Updated unittests to new testing method

        • configure_clock_timezone

        • configure_commands_to_template

        • configure_cos

        • configure_default_stack_power_auto_off

        • configure_default_stack_power_ecomode

        • configure_default_stack_power_switch_power_priority

        • configure_device_classifier

        • configure_device_classifier_command

        • configure_diagnostic_bootup_level_minimal

        • configure_diagnostic_monitor_interval_module

    • IOSXE
      • Updated unittests to new testing method

        • configure_diagnostic_monitor_module

        • configure_diagnostic_monitor_switch

        • configure_diagnostic_monitor_syslog

        • configure_diagnostic_schedule_module

        • configure_diagnostic_schedule_switch

        • configure_diagonistics_monitor_switch

        • configure_enable_http_server

        • configure_enable_secret_password

        • configure_event_manager

        • configure_event_manager_applet

    • IOSXE
      • Updated unittests to new testing method

        • configure_archive_rollback

        • configure_archive_time_period

        • configure_archive_write_memory

        • configure_bba_group

        • configure_bba_group_session_auto_cleanup

        • configure_boot_manual_switch

        • configure_boot_system_image_file

        • configure_boot_system_switch_switchnumber

        • configure_bridge_domain

        • configure_broadband_aaa

    • IOSXE
      • Updated unittests to new testing method

        • configure_pbr_route_map

        • configure_route_map_under_interface

        • modify_pbr_route_map

        • unconfigure_route_map_under_interface

        • configure_crypto_pki_profile

        • configure_no_pki_enroll

        • configure_pki_authenticate

        • configure_pki_authenticate_certificate

        • configure_pki_enroll

        • configure_pki_export

    • IOSXE
      • Updated unittests to new testing method

        • configure_event_manager_applet_event_none

        • configure_graceful_reload

        • configure_graceful_reload_interval

        • configure_hw_module_logging_onboard

        • configure_hw_module_slot_breakout

        • configure_hw_module_slot_logging_onboard_environment

        • configure_hw_module_slot_logging_onboard_temperature

        • configure_hw_module_slot_logging_onboard_voltage

        • configure_hw_module_slot_upoe_plus

        • configure_hw_module_switch_number_auto_off_led

    • IOSXE
      • Updated unittests to new testing method

        • configure_hw_module_switch_number_ecomode_led

        • configure_hw_switch_logging_onboard

        • configure_hw_switch_switch_logging_onboard_environment

        • configure_hw_switch_switch_logging_onboard_temperature

        • configure_hw_switch_switch_logging_onboard_voltage

        • configure_interface_macro

        • configure_interface_VirtualPortGroup

        • configure_ip_domain_name

        • configure_ip_domain_name_vrf_mgmt_vrf

        • configure_ip_domain_timeout

    • IOSXE
      • Updated unittests to new testing method

        • unconfigure_crypto_pki_server

        • unconfigure_trustpoint

        • clear_macro_auto_confgis

        • config_cns_agent_passwd

        • configure_absolute_time_range

        • configure_action_string

        • configure_action_syslog_msg

        • configure_archive_default

        • configure_archive_logging

        • configure_archive_maximum

  • nxos
    • Modified

      • ISSU HA boot-mode validation now skips show boot mode on EOR platforms.

      • EOR/TOR detection is based on show module output (Virtual Supervisor Module).

      • Added unit tests for EOR detection and EOR ISSU boot-mode skip behavior.

  • iosxe/interface/execute

    • Fixed execute_test_crash API authentication failure after device reboot

  • dependencies

    • update pyasn1 to 0.6.3 to address CVE-2026-23490

    • Removed pysnmp-sync-adapter dependency from the SNMP powercycler implementation

  • iosxe/ie3k

    • Removed API configure_ignore_startup_config.

    • Removed API unconfigure_ignore_startup_config.

    • Removed API verify_ignore_startup_config.

    • Removed API get_config_register.

    • Removed API execute_set_config_register.

  • iosxe/ie9k

    • Modified API get_boot_variables to use IE3k implementation for consistency.

  • iosxe/rommon
    • Updated device_rommon_boot

      • Added support for getting all the subconnections to rommon to maintain the stability.

Iosxe

  • added execute_ping_egress_next_hop to support next-hop ping egress execution

  • added configure_ip_local_policy_route_map for global ip local policy

Configuration.

  • added replace_extended_acl_entries to recreate extended acl entries in a

Modify
  • nxos
    • UTILS

      • Modified mgmt_src_ip_addresses and mgmt_ip_addresses regex patterns to capture both mgmt_src_ip_addresses and mgmt_ip_addresses correctly.

genie.libs.parser

New
  • iosxe
    • Modified ShowTelemetryIETFSubscription

      • Handling renamed column header

    • Modified ShowTelemetryIETFSubscriptionAllReceivers

      • Handling added field

    • Modified ShowTelemetryReceiverName

      • Handling renamed column header

    • Modified ShowTelemetryReceiverAll

      • Handling renamed column header

    • Added ShowIpv6Dhcp

      • Added schema and parser for ‘show ipv6 dhcp’

    • Added ShowPlatformHardwareQfpActiveInterfaceAllStatistics parser in show_platform_hardware.py

      • Added schema and parser for cli ‘show platform hardware qfp active interface all statistics’

    • Added ShowPlatformSoftwareLiveProtectShield

      • show platform software live-protect shield

    • Added ShowIpSshPubkeyServerAll

      • Added schema and parser for ‘show ip ssh pubkey server all’

    • Created ShowSystemInsecureConfiguration

      • Added schema and parser implementation for “show system insecure-configuration”.

    • Created ShowSystemSecurityMode

      • Added schema and parser implementation for “show system security-mode”.

    • Added SnmpGetBulk

      • Added schema and parser for ‘snmp get-bulk v{version} {ip} vrf {vrf} {community_str} non-repeaters {non_repeaters} max-repetitions {max_repetitions} oid {oid}’ command.

      • Added schema and parser for ‘snmp get-bulk v{version} {ip} {community_str} non-repeaters {non_repeaters} max-repetitions {max_repetitions} oid {oid}’

      • Added timeout parsing support for invalid VLAN community strings.

    • Added ShowPlatformSoftwareAccessListFpActiveStatistics

      • Added schema and parser for ‘show platform software access-list fp active statistics’

    • Added ShowRepTopology

      • Added schema and parser for ‘show rep topology’

    • Added ShowPlatformHardwareSlotSlotSensorConsumerAll

      • Added schema and parser for ‘show platform hardware slot {slot} sensor consumer all’

    • Modified ShowTelemetryIETFSubscriptionDetail

      • Adding parsing of reciever information

    • Added ShowPlatformSoftwareFedSwitchFnfFlowTableMonId

      • Parser for ‘show platform software fed switch {switch} fnf flow-table mon-id {mon_id} asic {asic} start-index {start_index} {num_flows}’

    • Added ShowPlatformHardwareSlotSlotSensorProducerAll

      • Added schema and parser for ‘show platform hardware slot {slot} sensor producer all’

    • Added ShowRedundancyInterchassis parser in show_redundancy.py

      • Added schema and parser for cli ‘show redundancy interchassis’

    • Added ShowPlatformSoftwareFedSwitchActiveVmapAll parser.

      • Added parser for cli ‘show platform software fed switch active vmap all’.

    • Added ShowPlatformSoftwareFedSwitchActiveVpKeyDetail parser.

      • Added parser for cli ‘show platform software fed switch active vp key {iif_id} {vlan_id} detail’.

    • Added ShowPolicyMapControlPlaneAll

      • Added schema and parser for ‘show policy-map control-plane all’

    • Added show platform software selinux

      • Added schema and parser for show platform software selinux

    • Added ShowInterfacesInterfaceStat

      • Added schema and parser for ‘show interfaces {interface} stat’

    • Added Parser for show cts keystore

      • Added a new schema and parser for the show cts keystore command.

    • Added show ipv6 route vrf {vrf} summary internal

      • Parse “show ipv6 route vrf {vrf} summary internal”

    • Added ShowHwModuleSubslotSubslotTransceiverTransceiverStatus

      • Added schema and parser for ‘show hw-module subslot {subslot} transceiver {transceiver} status’

  • iosxr
    • Added ShowControllersInterface

      • Added schema and parser for ‘show controllers {interface}’ command.

    • Added ShowControllersOpticsAppselAdvertised

      • Added schema and parser for ‘show controllers optics {port} appsel advertised’ command.

      • Added schema and parser for ‘show controllers optics * appsel advertised’ command.

    • Added ShowControllersOpticsObservableInfo

      • Added schema and parser for ‘show controllers optics {port} observable-info’ command.

      • Added schema and parser for ‘show controllers optics * observable-info’ command.

    • Added ShowControllersOpticsAppselDetailed

      • Added schema and parser for ‘show controllers optics {port} appsel detailed’ command.

      • Added schema and parser for ‘show controllers optics * appsel detailed’ command.

Fix
  • iosxe
    • Modified ShowPlatformSoftwareFedActiveMonitor

      • Updated regex pattern and code the fetch the valn name.

    • Modified ShowPlatformSoftwareFedSwitchActiveMatmMactable

      • Updated regex pattern to handle “machandle”, “sihandle”, “rihandle”, “dihandle” values.

    • Modified ShowCryptoIpsecSaInterface

      • Updated regex pattern p3 and p30 to handle missing remaining_key_lifetime values.

    • Modified ShowModule

      • Updated show module parsing to correctly match module entries for multiple entries also(switch number 1 and 2).

    • Modified ShowIpv6cefExactRouteSchema parser

      • changed regex to take both ip and ipv6 addresses

    • Modified ShowPlatformHardwareFedSwitchActiveVlanIngress

      • Modified parser by adding cli ‘show platform hardware fed switch active vlan {num} egress’

    • Modified ShowPlatformSoftwareFedSwitchActiveMatmMactable

      • Made ‘machandle’, ‘sihandle’, ‘rihandle’, ‘dihandle’ fields optional in schema

      • Updated regex to handle output format without handle columns

    • Modified ShowPlatformSoftwareFedIpv6RouteSummaryInclude

      • Added support to make available of below clis for all cat9k.

    • show platform software fed {switch} {mode} ipv6 route summary | include {match}

    • show platform software fed {mode} ipv6 route summary | include {match}

    • Modified ShowDeviceTrackingDatabase

      • Updated regex pattern to handle parenthesized time_left values from DHCPv6 prefix delegation entries.

  • iosxr
    • Modified ShowPlatform

      • Modified parser for ‘show platform’ command to include ‘[]’ in Type column

Command.

genie.telemetry